Feature(may vary by option.)
●Scale printing: double sided
[VVF Stripper (P-958)]
[Passed Gauge Set (Right-Hand)]
[VVF Stripper (P-929)]
[Passed Gauge Set (Left Hand)]
Description
The VVF cable is compatible with 0.08 inch (2.0 mm) x 3 cores. You can use this tool for measuring, peeling, cutting, and bending.
It comes with strip assist spring, so even those who are unfamiliar with the process don’t need to worry about damaging the core wire coating.
You can also strip eco wire (EM-EEF cable) with light force.
From the Manufacturer
|
|
|
|
|---|---|---|
of bend pliersPliers that can bend the shape required for wiring lamps receptacles and exposed outlets. |
Core coated stripCan strip 3 cores at the same time with 0.06 inch (1.6 mm) and 0.08 inch (2.0 mm) diameters. |
Cable exterior stripCompatible with 0.08 inch (2.0 mm) diameter x 3 cores |
|
|
|
|
|---|---|---|
Cable Cutting CutterCuts cleanly and lighter than pliers Also compatible with eco wire |
Surface ScaleYou can measure the length of the cable in 5cm increments |
Reverse scaleYou can measure the length of the cable exterior, etc. in 0.4 inch (1 cm) increments. |
|
|
|
|
|---|---|---|
Reverse scaleMeasure the length of the core wire sheath in 1 mm increments |
Spring for strip assistWhen the grip is loosen, the handle opens slightly and the core wire coating is less likely to get scratched. |
Reverse scaleScales for cables from 0.4 to 4.7 inches (1 to 12 cm) and for covering core wire up to 0.8 inches (20 mm). |
