Features:
1. Equipped with a start stop button and external switch control.
2. Motor soft start function. When the motor starts, the current will gradually increase, no intrusion current, effectively protect the motor and extend its life.
3. Duty cycles, upper and low duty cycles and operating frequencies can be set to allow the customer to operate and use the motor based on their working characteristics.
4. Digital encoder knob adjusts motor speed. This is more accurate and consistent than a normal potentiometer.
Standard 5135 Instrument Housing 5.
Specifications:
Item Type: Motor Controller
Working voltage: DC 5 V - 30 V, input reverse protection
Rated current: 5A, maximum current 15A
Maximum power: 150W
Working frequency: 1 kHz - 99 kHz adjustable, 1 kHz stepping, default frequency 20 kHz, accuracy approx. 1%
Duty Cycle: 0-100%, 1% Step
Product Size: 3.11 x 1.69 x 1.02 inches (79 x 43 x 26 mm).
All configurable parameters are power off.
Package List:
1 x Module
Note:
Digital Encoder Knob OperationIn Default Interface (Default Display Duty Cycle) Short Press - Switch Motor Start and StopLong Press - Duty Cycle ReductionRotate Clockwise - Increased Duty Cycle Setting InterfaceCounterwise Rotation
[Settings] Below the screen. SHORT PRESS - Select the setting parameters and display the lower limit of duty cycles, upper duty cycle and work switching down duty cycle as "L" + 2 digit numbers. The maximum duty cycle is displayed as "H" + 2 digit name "100". Operating frequencies display "F" + 2 digit. Long press - InterfaceRotates counterclockwise exit - reduces the corresponding settingsRotate clockwise - set parameters to increase according to
Connect POST STOP port open key or 3.3V level to external When the key is closed or the 3.3V level is lower, the motor will start to start.