Feature

●Gear ratio: 5.7/1 // Maximum winding length (per handle rotation): 40.6 inches (103 cm)
●Practical drag force / Maximum drag force: 17.6 / 28.7 lbs (8/13 kg)
●Weight: 14.8 oz (420 g) // Spool diameter / Stroke: 2.23 / 0.7 inches (57.5/19 mm)
●Nylon spool capacity: 16 lb / 262.5 yd (Gou:4/240 m), 20 lb / 207.8 yd (Gou:5/190 m), 24 lb / 175.0 yd (Gou:6/160 m) // PE spool capacity: 8 lb / 481.2 yd (Gou:2/440 m), 12 lb / 328.1 yd (Gou:3/300 m), 16 lb / 229.7 yd (Gou:4/210 m)
●Handle length: 1.9 inches (65 mm) // Number of bearings (BB/Roller): 10/1
●Category: Unisex, Adult

[5000HG]




[5000XG]




[6000PG]




[14000XG]




[8000PG]




[1000HG]




[6000HG]




[6000XG]




[10000PG]




[14000PG]




[4000XG]




[8000HG]





Description



From the Manufacturer



11

Twin Power SW "TWIN POWER SW"

The "strong shape" required for salt-game reels are really diverse.Rigidity and toughness that can withstand hard use, strong waterproof performance to prevent saltwater intrusion, and most of all, the power of winding is desired.The Twin Power SW is fully equipped with a mechanism that inherits the strength of Stella SW such as Infinity Drive, Heat Sink Drag.

*Pictures are for illustration purposes only, color and shape may vary depending on the model number selected.

The image shows 10000HG.

Features

11

11

11

11

Infinity Drive

The traditional X-Ship construction provides a light winding by supporting both ends of the pinion gear with bearings.This model is equipped with an infinity drive structure that further improves its structure.The main shaft is contactless supported by pinion gear, and supported by special low-friction bushings to greatly reduce the sliding resistance of the main shaft.In addition, the main shaft itself has been treated with special surface treatment, resulting in an even lower friction.Rotational torque is reduced by about 30% compared to conventional products.*It has evolved into a powerful reel that can be actively wound even under heavy loads. According to our comparison test.

Heatsink Drag

The traditional X-Tough Drag is constructed with a drag mechanism at the bottom of the spool for improved drag performance and durability.This model is equipped with a heatsink drag that is even more resistant to heat.By the heatsink panel that releases heat generated from the drag part to the outside of the spool, the drag force decreases by approximately 50% due to heat drain.In addition, due to the insulation sheet that blocks heat flowing into the spool spool, the temperature increase in the spool part is reduced by about 30% by the success.The line has evolved into a more gentle and stable drag.(10000PG, 10000HG, 14000PG, 14000XG) *According to our comparison test.

X Protect for Line Roller

Equipped with the stopper bearing part of the previous model, the X protective structure greatly contributes to high waterproof performance.The Twin Power SW has been equipped with the X protective structure in addition to the stopper bearing parts, and the line roller part has been also improved to waterproof performance.Similar to the stopper bearing parts, the saltwater penetration paths are physically sealed with sealing materials, and the structure is able to withstand high water pressure.It protects the bearings inside the line roller from harsh environments. Compared to conventional products, the bearing is 10 times more durable than conventional products. According to our comparison test.

X Tough Drag

Each washer is made of only metal and carbon, supporting the spool from both up and down.Improved heat resistance and durability for smooth and stable drag performance.(Except 4000XG)

11

11

11

11

Rigid support drag

By supporting the spool with 2 bearings in the main shaft, the spool is suppressed, and the spool has a stable and smooth drag performance.

Silent Drive

The basic design of the entire body and drive related parts have been revised one by one, and thoroughly eliminates fine rattles, gaps and swings between the parts.The areas of the improvement include drive gear, warm shafts, worm shaft pins, and worm shaft gear.It achieves a smooth rolling performance and silent winding experience.

X Ship

Larger drive gear radiation, pinion and drive gear placement and pinion gear bearings for two points of supportThese stubborn gears have a light reeling that is resistant to loads.

Hagane Gear

Press metal chunks with high pressure and finish with micron accuracy without cutting.A unique technology called precision cold forging creates a hard, sticky gears that allow for smooth winding comfort.

11

11

11

11

Hagane body

Lightweight and rigid metals such as aluminum and magnesium are used to firmly suppress the sagging, warping and twisting of the reel.Protects delicate gear interferences for smooth reeling

X Rigid Rotor

Using aluminum alloy and three-dimensional analysis have been utilized to test the thickness of the wall in every detail to achieve stronger rigidity and durability and better rotational balance.This high rigidity also helps improve drag and other functions.

X Protect for Stopper Bearings

Contact-type triple-lip construction on stopper bearingsFilling with special grease, reduces friction resistance, and provides high waterproof performance without compromising silky rotational performance.The waterproof performance of the body is equivalent to IPX8 waterproof standards due to the effects of the X shield.

X Shield

It has a strong seal applied to the body, lid, spool and drag knob contact, and prevents water from penetrating paths.Ensures high durability in SW games that are in extreme conditions.

11

CI4+ Handle Knob

For models ranging from #4000 to #8000, we adopt the CI4+ handle knob made of lightweight carbon material that is rigid and durable.It is made to be more lightweight and has been specially coated to prevent slipping, making it even more smooth to wind.Provides a good wearing experience.(10000 to 14000 comes standard with a lightweight hollow oval round handle knob.)