Feature

●Size: 0.24 inch (6 mm), 0.49 inch (10 mm), 0.51 inch (13
●Chamfer Cutter Material: High-speed steel HSS4241, Plate Angle: 90 degrees, 60-63 HRC chamfering cutter treated with titanium coating. 90° angle at all points for sharp and accurate Blade is hardened for sharpness
●[Increased Efficiency] An excellent tool that combines drilling, tapping, deburring, and countersink functions with one tool. It can greatly reduce the hassle and time. Since it uses a hexagonal shaft, it can be used safely even in situations where torque is applied. It is very useful for home DIY or office use, as it is often used for small manual work
●Applications: Can be used for beveling and deburring iron, aluminum, brass, copper, wood, etc., for drilling holes in thin sheets, and for deburring vacuum pipe chassis cases. Versatile and versatile drill set for DIY home building engineering and more
●[Scope of application] Suitable for home and general construction and engineering, especially for DIY use. Suitable for wood and soft metal, countersunk screws and fixtures Applicable to materials with hardness below 68°F (25°C), (e.g. iron plates, insulation boards, PVC boards, wood, etc.)


Description

Beveled Cutter Set of 6
The bevel cutter is a durable and practical conical drilling tool that can be used to remove burrs when drilling or removing dishes without the head of wood screws (screws). Made of high-speed steel that will not lose its hardness even at high temperatures, and it will not wear out even after long periods of use, and will not deform or shatter even under strong pressure. It also has the advantage of keeping your lower back from shattering even when turned into a sharp edge. Adopts a hexagonal shaft so you can use it safely even in situations where torque may occur.

Product Specifications:
Material: HSS4241/High Speed Steel
Surface treatment: titanium coating.
Size: 6mm, 10mm, 13mm, 16mm, 19mm
Dish angle: 90 degree

[Scope of application]
Suitable for home and general construction and engineering, especially for DIY use. Suitable for wood and soft metal, countersunk screws and fixtures Applicable to materials with hardness below 68°F (25°C), (e.g. iron plates, insulation boards, PVC boards, wood, etc.)