Feature
●Warm, Heated Toilet Seat: You can switch between the temperature between low, medium, and high depending on the season. Examples: Summer, Cut, Low (94 °F), Autumn and Winter, Medium (94 °C), Winter (88 °C), High (88 °C)
●Energy Saving Achievement Rate 154%: You can use the 8-hour timer to save energy. Press the "8 hours off" switch on the control panel to turn on the power saving lamp and stop power for 8 hours. Please use the toilet seat for a long time before sleeping or going out. After 8 hours, the power saving lamp will turn off, and the toilet seat heater will start to pass the toilet seat heater and return to the previous set toilet seat temperature
●Removable Toilet Lid: The toilet seat can be removed for easy cleaning even in difficult areas
●(Slow Closing Soft Closure) The toilet seat and toilet lid close slowly so you dont have to pinch your fingers or make a loud noise
●Can be installed in regular size (normal) [Toilet seat mounting hole to tip of toilet bowl] or elongate size (large) [Toilet seat mounting hole to toilet tip size: 18.5 inches (470 mm)]. Cannot be installed on objects with a depth of 3.5 inches (90 mm). Cannot be attached to special shaped toilets such as Japanese style toiletries, foreign country products, and infants
[Ivory New Model]
[white New Model]
[Ivory Old Model]
[white Old Model]
Description
You will need to work indoors in advance to plug in the heated toilet seat. Please be sure to ask an electrician for this project.
Please do not use the power source other than AC 100 V (50/60 Hz).
Please do not use this product exceeding the ratings of electrical outlets and wiring fixtures.
Please do not use a rattle outlet.
Do not install in places with high humidity, such as toilets in the bathroom. (There is a risk of breakdowns, electric leakage, or electric shock. )
From the Manufacturer
Operation panel
8-hour timer
When the timer is in use, power will stop to the toilet seat.
Please use this product when you are going out, or when you are not using it for a long time.
Toilet seat temperature:
Can be switched between cut, low, medium, and high temperatures.
Simple function heated toilet seat
Simple design without any complicated buttons.
Warm toilet seat for everyday comfort
Even in the winter, it will not become bulky and comfortable to use.
Easy & No tools required. How to install the toilet seat?
|
|
|
|
|---|---|---|
(Before Installation)Remove your current toilet seat. Loosen the nut with a monkey wrench, remove the nut and gasket and remove the toilet seat. If the nut is rusty and cannot be removed, please loosen it with a commercially available screw loosening spray and remove it. |
Installation Instructions:1. The size A of the toilet seat is 17.3 inches (440 mm) and 18.5 inches (470 mm) depending on the type, but it can be adjusted by the bolt position.(Can be used with standard and large elongate sizes) |
If the measurement A is 440mm, the mounting bolt is on the front side, 470mm install the mounting bolt on the back. |
|
|
|
|
|---|---|---|
|
2.Insert the set in the bowl hole and move the toilet seat back and forth to adjust the position with the bowl. |
3. Place the toilet seat into the toilet bowl and put through the seal of the illustration from the bottom of the bowl.Then temporarily fasten with nuts. |
4. Move the toilet seat back and forth to adjust the position with the toilet seat, then tighten the nut firmly and fix it.After installation, please make sure it is not moving. |
How to Clean:
|
|
|
|
|
|---|---|---|---|
How to remove the lid: Step 1.Open the toilet lid 90° straight upward. |
How to remove the lid step 2:Pull the left side of the lid directly up to remove it. |
How to install the lid: Step 1.Install the right axis first, at the same angle as you were taken off. |
How to install the lid: Step 2.Install the left axis. |
