[Point Controller Set]

[Single Item]

商品紹介

Rails snap together with nails for easy and secure connection. Joiners use an improved joiner. Interrupt anti-shedding guide included Durable die-cast molded tip orbite. Works with Next Neopoint Control Box Compatible with conventional TOMIX rails Accessories: Dummy point motor runner; Dummy point motor base; Note for fine track handling: 1. Please adjust the rail horizontally. Be careful not to twist. Repeat pulling and inserting at an excessive angle will damage the rail tip such as the joiner. 2. Make sure the rails are connected securely before driving. If there is a step between the connected rails will cause the vehicle to escape and damage the rails quickly. 3. Use the dedicated D.C. feeder N to supply power from the power unit to the rail. 4. In order to maintain the power flow of the rail, you should often polish all rails with the separately sold <6401 >Rail Cleaner and wipe dry. Please be careful not to apply oil, etc. 5. The roadbed (base) is made of ABS resin, so please do not leave it in high temperature places (direct sunlight, near heating appliances, etc.) It may be deformed. Also, be careful of thinners and other chemicals. The color of the rail floor may vary depending on the painting method. Please be aware of About the Joiner: 1.When you connect the rail, adjust the direction of the joiner horizontally (or slightly upward). 2. If the joiner is removed, please pay attention to the joiner direction. Please be careful not to injure sharp areas. Do not use Joiner Repair (sold separately). This may cause damage to the joiner. The length is the same as the standard 280mm double cross point.

Amazonより

   離れたところからでも切替えができる電動タイプのポイントレール。電動用の駆動ユニットを薄い道床部分に収め、模型としては実感的な仕上がりになっている。電動用の駆動ユニットから伸びるコードの先端には、オリジナル小型コネクターが付いており、切り替えスイッチのポイントコントロールボックスNとの結線も簡単に行える。