Feature

●This analyzer SWR range is 1.0 to 9.99. Step Size: 100Hz, 1KHz, 10KHz, and 100KHz user configurable increments
●5 operation buttons are easy and convenient to operate. Choose between operating modes, bandwidth and extended functions
●Beautiful and simple design black case protects your antenna analyzer from external damage
●This makes a great SWR antenna analyzer for ham enthusiasts and professionals
●Battery compartment on the back of the device, battery not included


Description

Specifications:
Frequency Generation and Control: 1 - 60 Mhz
Source Impedance: 50 Ohm
Stability: +/- 100 ppm
Spectrum Purity: Over 60MHz > TBD dB harmonic waves.
Step Size: 100 Hz, 1 kHz, 10 kHz and 100 kHz user programmable increments
SWR usable measurement range: 1.0 - 9.99
Impedance: Approximately 5-2000 ohms
RF Output: Adjustable 2.0V pp (standard)
Power Supply: External 12-14V DC, powered at 500mA
Connector: RF
USB: Mini B Receptacle
External Power Supply: 0.08 inch (2.1 mm) power jack (center pin plus)
Size: 150 x 90 x 40mm / 5.9 x 3.54 x 1.57in

Application:
1. Electrical antenna parameter measurement: SWR, impedance (resistance+reactance), capacitance, inductance
2. Measure power point impedance 3. Measure ground loss
4. Adjust the antenna tuner to determine the loss
5. Measure inductors and capacitors
6. Coaxial transmission track measure (SWR, length, speed coefficient, approximation Q and loss, resonance frequency, impedance)
7. Measure and determine the optimal tuning stub settings (SWR, approximation Q, resonance frequency, bandwidth, impedance)
8. Determine the transmission track characteristic impedance
9.Coaxial cable loss
10. Determine the loss of antenna tuner
11. Measure balance loss
12. Measure inductor Q
13. Estimate the parameters of the crystal oscillator
14. Measuring magnetic loop resonance and SWR
Package Includes:
1 x Analyzer (Power supply not included)