Feature

●Construction and lighting supplies, plumbing equipment, and related flanges
●Manufacturer Name: Sekisui Chemical Co., Ltd. / Features: The flange part can be rotated, so it is easy to position at the site, and it can shorten the installation time. Comes with a locking rib to prevent it from falling out when going through vertical piping. [Uses] For piping in chemical factories pharmaceutical piping, semiconductor factories, pure water piping, aquatic factories, saltwater piping, food factories, waste water treatment lines, etc. / [Specifications] / Product Name: Eslon HI Loose Flange 10K 65A / Model Number: TLFHI65 / Nominal Diameter A: 65 / Nominal Diameter B: 2 1/2 / Outer Diameter : 175 / Inner Diameter : 3.0 inches (76.6 / 25 mm) / Bolt Hole Center Diameter: 5.5 inches (14 mm) / Maximum Working Temperature: 60 mm) /JIS B2. 220 Standard Product / Compatible Bolt Nuts (for one side loose (M16/lower neck 3.1 in (80 mm) 4 pieces) / Compatible Bolt Nuts (if both sides are loose (M16/lower neck 4) / Maximum Allowable Pressure: 1.0 MPa / [Material/Finish] / Hard PVC (PVC) / Glass Fiber Reinforced
●Polypropylene resin/[Set Contents/Accessories] / HI-TS Adapter/ Weight: 19.2 oz (560 g) / JAN Code: 4547204500166 /


Description

Product description

Manufacturer Name: Sekisui Chemical Co., Ltd.
[Features]
The flange part can be rotated, so it is easy to position at the site and shorten installation time.
Comes with a locking rib to prevent it from falling out when going through vertical piping.
[Uses]
For piping such as chemical factories, chemical plants, semiconductor factories, pure water piping, aquatic factories, saltwater piping, food factories, waste water treatment lines, etc.
Specifications:
Product Name: Eslon HI Loose Flange 10K 65A
Product Number: TLFHI65.
Nominal Diameter: 2.6 inches (65 cm).
Nominal Diameter B: 2 1/2
Outer Diameter: 6.9 inches (175 mm)
Inner Diameter: 3.0 inches (76.6 mm)
Thickness: 1.0 inch (25 mm)
Bolt Hole Center Diameter: 5.5 inches (140 mm)
Number of Bolt Holes: 4
Bolt Hole Diameter: 0.75 inches (19 mm)
L: 2.8 inches (70 mm)
Maximum Operating Temperature: 140°F (60°C).
JIS B220 Standard Product
Compatible Bolt Nuts (if one side is loose, M16 / lower neck 3.1 inches (80 mm) 4 pieces)
Compatible Bolt Nuts (if both sides are loose, M16 / lower neck 3.3 inches (85 mm) 4 pieces)
Maximum Allowable Pressure: 1.0 MPa
[Material/Finish]
Hard PVC / Glass Fiber Reinforced Polypropylene Resin
Set Contents/Accessories:
HI-TS Adapter
Weight: 19.2 oz (560 g)
JAN Code: 4547204500166

ご注意（免責）＞必ずお読みください

●お届け時間の指定は承れません●使用用途以外で使用しないでください｡●破損に繋がるような使用はしないでください｡