The 1/12 scale snap-fit super cub can also be reproduced after minor changes.
Product is a kit form that requires assembly. 1/12 scale.
No need for painting: The parts are colored in the mold color, and the body has a glossy texture that cannot be achieved with paint.
No Glue Required: The design allows for easy assembly.
The product is based on the current Super Cub C110 released in 2018.
You can choose and produce 2 types of brake lights that support the initial type and May 2020.
The number of operating parts unique to the 1/12 scale scale has been accurately reproduced.
The body is made of a special molded material to recreate a level of gloss that is difficult to describe with paint.
The molded colors are composed of 9 types: Beige, Brown, Gloss Silver, Black, Ivory, Clear Red, Clear Orange, and Clear.
Even if you assemble it straight, the visuals like painted by colored parts, parting parts significantly reduces masking work even in the case of painting.
The body is made of 2 pieces with left and right fit.
The leg shields are molded into one piece and are designed to easily press and fasten to the body.
The slide mold on the front fender allows for accurate reproduction of the model, while integrating the parts.
The side cover has been designed to separate parts from the body, and the complex shapes are composed of curves and straight lines.
The handle is shaped to fit into the body, and the grip switch on the left and right are also firmly shaped.
The meter panel is represented with the included stickers, and the panel cover is inserted with clear special parts for a realistic finish.
The mirror is designed with ultra-fine injection to create the atmosphere of the actual car.
The brake lever, which is different from the handle, has been reproduced in different parts and the exact shape.
The headlight has clear lenses and the interior shape is also delicately sculpted.
The engine is made of 3 parts divided into the left and right parts to create a three-dimensional appearance.
The change pedal is a single piece part that accurately reproduces the bar cross section and pedal shape.
The muffler has a three-piece construction that reproduces the exhaust outlet and conical shape.
The super Cubs signature leg shield hook inside is easy to seal or use the bonus adhesive parts.
The stand is movable after separate parts. It can also be parked.
The side stand has been made with separate parts and is movable. You can tilt the body to park.
The sheet is a 2-piece construction that is divided into the same part of the color, and is movable to flip up.
·Reproduces the flat oil inlet when the sheet is opened
The name decal on both sides of the fuel tank has a metallic feel wheel seal.
The rear carrier uses a slide mold and is a single piece.
You can choose between 2 types of brake lamps that are horizontal and long after the 2020 revised law, and the vertical type from the time of release.
The rear seat of the actual car optional parts are included with bonus parts. Installation options available.
The hub in the center of the wheel is a single piece part that reproduces the surrounding shape using the slide mold.
The tires are made of rubber material and are specially used for this product. Accurately reproduces the difference in width between the front and back.
Size when completed: Approx. Length 6.1 x Total Width 2.3 x Height 3.4 inches (155 x 58 x 87 mm).
78 pieces assembled
Included Accessories:
Runner x 14
Rubber material tires x 2.
Assembly instructions x 2
Sticker x 1
Decal x 1
This product is manufactured in Japan.
This product is a plastic model kit that requires assembly.
No