The power source for the effector, three main elements affect the sound quality.
The first is voltage.
Many people have experienced the sound changing due to voltage changes over time when the effect is running using batteries.
It is important that the power supply for the effector is to provide the right voltage stability.
The second is the current supply capacity.
From bass to treble, the ability to instantly supply the current that the effector needs is important.
The third is the noise component.
When power the effector, the noise components of the power will be mixed into the output signal of the effector.
Using a power source with high noise components, the signal of the instrument will vary by the noise and is difficult to perform the effect itself itself. It is important that the noise composition is as small as possible to ensure the effect is performed
The STABILIZED POWER 9.6 combines these key elements. The STABILIZED POWER 9.6 AC adapter was designed by FREE THE TONE to focus on sound quality and other parts such as power cables and plugs, so as to maximize the performance of analog and digital effectors.
Experience the overwhelming sound change when power is powered with STABILIZED POWER 9.6.
Features
Designed to reach the output voltage close to a new battery.
Stabilizing circuitry keeps output voltage constant.
Adopts a highly efficient power transformer, improved heat dissipation performance inside the adapter, stabilization, and optimized power circuit, so the current volume can be taken out, and the current capacity is 350 mA.
Ultra-low noise design that resembles the battery.
Note:
This unit can be used with devices with a rated voltage of DC 9 V (center negative) and a current consumption of 350 mA. Please check the polarity of the power before using. This unit is for AC 100V only. Always use an AC 100V power outlet.