Function:
1 The standard stability gain is 38dB and the small noise index is 4.5dB.
2. Broadband low noise radio frequency amplifier adopts shield shell design to ensure stable operation.
3 Can be used in a variety of RF reception front ends to extend the transmission distance.
4 The amplifier has a wide frequency range from 0.1MHz to 2500MHz, which provides effective signal reception.
5 It is widely applied to a wide range of shortwaves, FM broadcasting and other places where low noise and low signal radio frequency amplification is required.
Specifications:
Item Type: RF Amplifier
Function: This amplifier has the advantage of a wide frequency range and high gain. Can be used with various gain modules for radio frequency reception to extend the transmission distance. Wide range of shortwaves, FM broadcast, remote control receiver, cable TV signal amplifier, and other places where small signal RF amplification is required.
Material: Synthetic resin + copper foil + printed circuit board
Operating frequency: 0.1 - 2,500 MHz
Amplifier Gain: 38dB (standard value)
Amp Gain:
F = 0.1MHz, Gain = 38dB
F = 500Mhz, Gain = 38dB
F = 1000MHz, Gain = 38dB
F = 1500Mhz, Gain = 37dB
F = 2000MHz, Gain = 35dB
F = 2500MHz, Gain = 33dB
F = 3000MHz, Gain = 29dB
Maximum output power: +7dBm (5mW) compression point at 1dB
Noise Factor: 4.5 dB (standard value)
Supply Voltage: + 5VDC
System Impedance: 50 Ohm
Package List:
1 x RF Amplifier
Note:
Do not use outside the rated voltage and current parameter range.