[M6 × 1]

Product Specifications:
Contents: Drill, Tap, Coil, Insert, Lug Break Tool
Compatible Size: M10*1.5

How to Use:
1.Drill the damaged screw hole.
2.Make sure the bolt and tap are the same pitch and tap to cut the screw into the drill hole.
3. Insert the tang of the coil into the groove of the insert tool to attach and secure the coil.
4. The length of the coil can be adjusted by moving the color of the insert tool, then screw the coil into the threaded threaded with a tap.
5.Place the lug break tool on the tongue and knock it sharp to remove the tang. Never break the tang.
6.Remove the tang and allow the screw holes to be used.

[Precautions]
Please make sure to check the following contents.
This product is not made in Japan.
※ Returns and refunds are not accepted after use. Make sure to check for defective areas before use.
Instruction manual not included.
We cannot guarantee any claims of disassembly, modification, or other accidents or damages caused by unintended use.
Use of this product at your own risk.
We will not be responsible for any accidents or damage using this product.
There may be scuffs or scratches as this is an imported product.
As this is an imported product, specifications may be subject to change.