ITC-608T Temperature and Humidity Controller, 12 Cycle Time, 1800W Digital Pre-Wired Outlet Humidifier Thermostat Reptile Home Brewing Planting Fermentation
bullet points
ITC-608T Thermostat Temperature and Humidity Controller is ETL
2. Three multi-function temperature and humidity control modes with dual relay output.
ITC-608T works as a temperature controller, humidity controller, and temperature and humidity controller. First, simply plug the temperature sensor into the cooling and heating device. Then connect only the humidity sensor with the humidifier and dehumidifier. Third, connect both temperature sensor and humidity sensor to heating and humidifier/dehumidifier.
3. Support calibration, compressor delay and reset value saving.
Celsius or Fahrenheit display, easy to set up, dual display window for PV and SV It also has a compressor delay to protect the cooling device. ITC-608T can preserve the original settings in case you accidentally turn off.
4.More power up to 1800W
Temperature control range is -40-212°F (-40-100°C), humidity display range is 5-99.0% RH. Max Load: 120V 15A 1800W The temperature sensor is waterproof, but the humidity sensor is not waterproof.
Specifications
Maximum output load: 120Vac, 60Hz, 15A, 1800W
Temperature measurement range: -40~100°C / -40°F to 212°F
Temperature display accuracy: 0.1°C/°F (<; 100°C/°F)
Relative Humidity Measurement Range: 5 - 99% RH
Humidity Display Accuracy: 0.1% RH
Display Unit: Temperature: Celsius °C or °F; Humidity: %RH Display Unit: Temperature: Celsius °C or Fahrenheit; Humidity: %RH
Ambient Temperature: -20°C ~ 60°C or -4°F ~ 140°F
Storage Environment: Temperature: 0°C-60°C or 32°F-140°F; Humidity: 20~80%RH (unfrozen or condensed)
Temperature Sensor Cable Length: 2m (78.74in)
Humidity Sensor Cable Length: 6.6 ft (2 m) (78.74 in)
Input power cable length: 1.5m (59.05in)
Unit Dimension: 20.8cm x 8.5cm x 3.5cm (8.19" x 3.35" x 1.38")
Package Contents
1x ITC-608T Temperature and Humidity Controller;
1x User Manual