Digital Thermostat Temperature Controller 12V 24V 220 for Incubator Heater and Cooler °C or °F
Switch between cool and heat.
Set temperature and differential values to control temperature.
Temperature calibration;
Freezer control output delay protection;
Alarm when temperature exceeds temperature limit or sensor error
All parameter settings can be saved when power off.
Can be used in household freezers, water tanks, refrigerators, commercial chillers, steamers, industrial equipment, and other temperature control applications.
Power Supply: AC 90-250V 50/60Hz / DC 12V / DC 24V
Temperature adjustment range: -66~248 / -55~120°C
Return value: 0 - 30 / 0 - 10 °C
Accuracy: ±0.2 (mode) / ±0.1 (mode)
Resolution: 0.1 / 0.1 °C
Measurement input: NTC sensor 10K 1m
Relay Contact Capacity: Cool Heat 10A max
Size (L x W x D): 3.0 x 1.3 x 3.3 inches (75 x 34 x 85 mm).
Mounting Size: (L)2.8 x (W) 1.1 inches (71 x 29 mm)
Code
Functions
Setting Scope
Default
F1
Temperature Settings
-66°F to 248°F/-55°C to 120°C
50°F/10°C
F2
Return Agreement
0~30°F/0~10°C
3
F3
Compressor delay time
0-10 minutes
3 minutes
F4
Temperature calibration
-10 - 10
0
F5
Switch between °C and °F
°C/°F
°F
F6
Set a high temperature alarm limit
-66°F to 248°F/-55~120°C
Off
1 x Temperature Controller
1 x Temperature Sensor
1 x Instruction manual (English language not guaranteed).
Power Supply AC110V 220 Wire Connection:
Note: The voltage output is not direct. Additional power supply required for load.
Version 2 3: Power Supply DC12V or 24V Wire Connection:
Note: Voltage output is not direct. Additional power supply required for load.