Feature

●This is a car carrier type that attaches to the left and right of 47.2 inches (1,200 mm) stainless steel pipe side bars in 3 places on one side of the cargo compartment
●This kit includes left and right side bars, front and back bars. Also includes economy type pads and an adjustable height extension stay
●Side bars are installed in 3 locations on one side and 6 locations on the left and right side, so you can rest assured that the load capacity is also safe
●It is installed using a youth full nut (screw holes) located on the cargo area, so no drilling or processing is required. For new type of attley, use the screw holes that remove the assist grip and the utility nut at the top of the cargo area
●Depending on the grade, those who want to increase the load bearing capacity can also be reinforced by adding 0911 side bar fixing hardware (sold separately)
●Attach the telescopic slide bar front and back bar to that side bar. By turning the attachment orientation, you can freely hang it up to 5.9 inches (3 cm) above the side bar and the extension stays included in the kit (0.8 inch increments with mounting holes) at the bottom of the side bar
●The extension stays come standard with a set of 3 types, including 4 holes, 6 holes, and 8 hole stays, which can accommodate a variety of loads. If you want to use it with 8 hole stays, you can add 4 holes and 6 hole stays, and use it as an 8 hole stay


Description

Compatible with new high jet cargo and new model attleys released in 2021 and later.

Daihatsu High Jet Cargo 11th Generation (S700V, S710V, S320V, S330V Series)
Daihatsu Atley 6th Generation (S700V/S700W/S710V/S710W Type)
The 300 series attleys are hidden in the inner lining, so the product code with the model is 0152.
Toyota: Pixis Van (S700M, S710M Series, S321M, S331M Series

For safe use
This kit is available in one way to use it alone, but to prevent accidents caused by sudden brakes, we recommend that you purchase a band kit (sold separately). Strong elastic band holds board and bar securely

Precautions for Use:
The load is estimated with 2 basic shortboards, 2 snowboards, or 1 fan board, but please check the safety of this product every time when loading.

As it is dangerous for items moving during sudden braking or sudden starts, please be sure to use the optional band kit (product code: 2011, 2012) or commercial braiding or rubber tubes.

Please note that the car with side airbag is not confirmed for safety.

We do not offer any guarantee for accidents, damage, injuries, etc. caused by this product.

Please be sure to check the safety and use at your own risk, and reinforce as needed with care of the loading.

Please understand this in advance or refrain from purchasing.
Purchasing Notes:
High Jet Cargo "Cruise Turbo SA3", "Cruise SA3",
Sunburban "VC Turbo", "VC",
Pixis van "Cruise Turbo SA3" and "Cruise SA3" are molded ceilings, so drilling may be required.
The "molded ceiling" is a specification that the ceiling is lined and there is no "youth full nut" at the top of the cargo area.
The grip must be removed if the "rear seat grip" is attached due to special specifications such as business packs.