This is a 2.0" TFT LCD expansion board with serial SPI interface. This display contains a controller with RAM buffering, so there is little to no microcontroller jobs. Pull out the TFT pin and the breakout pin pitch is 2.54mm, so the secondary development is not so difficult.
Pull out the PAD pin and solder the pin header to connect to the breadboard or use the DuPont cable to connect to the Arduino board.
It is also connected to SMD pins (half hole process) so you can solder it to an experiment PCB board or your own design board. It is perfect for designing great projects.
RTC modules allow you to design your clock.
The NFC reader module allows you to create an access control system on a photo show.
- Can be used directly to display letters, graphics and BMP format images.
-COMPATIBILITY: With the logic level of 3.3V, it is compatible with 3.3V Arduino board and can be connected to OPEN-SMART UNO black version with 5V/3.3V power switch. If you use 5V Arduino board(Arduino UNO R3 / Arduino Mega2560 / Arduino Leonardo), you need to add a level conversion circuit. Can also be directly connected to other 3.3V MCUs.
- Resolution: 176 x 220, 16-bit (262,000) color
-Display Size: 2.0";
-Operating Voltage: 3.3V;
-Logic Level: 3.3V;
- Working current: Max 50mA
-IO port package: Both SMD and PAD are available, the pin pitch is 2.54mm.
- You can connect the LED pin to the external backlight control circuit to control the brightness of the backlight. When you connect this to GND, you can light up your backlight all day.
- Great for DIY projects
Package includes:
1 x 3.3V 2.0" 176 x 220 Serial SPI TFT LCD Shield Breakout Module for Arduino Nano Pro Mini