Feature

●This product is a tool setter primarily used for engraving machines
●Easy to use 8mm stroke normal open tool setting
●Made of cemented alloy material, wear-resistant and long life
●Waterproof and oil-proof design can be adapted to a variety of environments
●It can greatly improve the efficiency of the carving knife


Description

Specifications: Item Type: Automatic tool sensor, Test Speed: 2.0 - 7.9 inches (50 - 200 mm) per minute
Service life: 3 million times
Maximum Diameter: Approx. 0.5mm/0.02"/20mm/0.79"
Overall Height: Approx. 65mm/2.6"
Total Stroke: Approx. 8mm/0.3"
Default Form: NC Normal Close Type/NO Normal Open Type
Voltage Range: 10-30V DC
Rated voltage: DC24V±10%, 20mA (max)
Blow:Yes
Bring the indicator light: Yes (normally open if closed)
Protection grade: IP67 x 100% waterproof, oil-resistant seal performance
Optional output mode: NO/NC
Journey: 5
Repeat Accuracy: 0.002 (Conditions: Operating Speed: 2.0 - 7.9 inches (50 - 200 mm) per minute
Protective structure: IP67
Contact Force: 1.5N (installation state must be vertical)
Tool Surface Material: Carbide Alloy
Surface treatment: Mirror polished 4S
Contact Rating: DC24V 20mA (Max) Recommended Value 10mA Resistance Load
Cable Specifications: Standard 5.9 ft (1.8 m) oil resistant
Cable Sheath: Approx. 8mm/0.3in 304 Stainless Steel
Output mode: B: NC (emergency stop at signal disconnection).
Contact Voltage: DC24V 20mA Resistance Loads (In special cases, load and current limit must be added)
Applicable Scope: Mainly used with engraving machines
Package List: 1 x Auto Tool Sensor 1 x Accessories