Feature
●Solves the problem of leakage: The dam barrier has a waterproof effect. Use it on shower floor, shower tray, sinker, bathroom door, bath tub end, washing machine, toilet, etc., effectively prevent water flow and dry moisture separation
●Caulk, Corner Sealing Strip: You can change the gap between your countertop (or bath tub) and the wall. Prevent water from entering the gap and prevent the cabinet from becoming mildew and dripping into hard to clean corners. The water retaining strip is a right angle triangle, which can be used well on bathroom floor (or bathtub) and wall joints for beautiful decoration
●(Easy Installation) First, clean the surface of your countertop (or floor) and wipe it to dry, measure the length of the shower plug according to yourself, peel off the red tape and stick it to any smooth surface. For a better seal, you need to use a silicone sealant to fill the end of the water stop barrier and allow the sealant to cure for 24 hours
●Silicone Material: The shower partition is made of high quality solid silicone that is waterproof, high temperature and abrasion resistant. Shower door silbaffles are also flexible and can be cut freely if needed. Smooth surface is easy to clean and keep your kitchen clean
●Note: We recommend cutting the corners at 45 degrees and joining at 90 degrees for installation. The adhesive is more durable and firm. If there are quality problems after you receive the waterproof strip, please contact us first. We will do it as soon as possible
[200cm]
Description
❤️ Take a look at our new products. We look forward to working with you.
Features:
- Easy to cut to fit your tub or kitchen sink to create a variety of shapes.
- Soft enough, easy to use, wheelchair friendly.
- Ideal for preventing expensive floor damage caused by overflow.
-Very suitable for shower sill , dam barrier, waterproof device, water stop, splash proof
Specifications:
Color: White
Material: Silicone Rubber
Size:3*5cm
Installation Instructions:
- Clean surface thoroughly and dry This is very important.
- Determine the position of the water bar and mark the ground with a pen.
- Use the hacksaw to cut the dam to a specific length.
-Peel off the pre-pasted tape and place it in place. When its cold, heat it with a hair dryer to increase viscosity.
- Package the edge seal, remove excess silicone and leave a smooth caulking line.
- Dry and should not touch water for at least 24 hours.
Package includes:
1 x Water retention strip.
After-sales service:If you have any question about the quality of the products, please contact us by email. We will solve the problem.