How to Connect
Connects to P4: 1. Plug the USB cable into the P4 unit and the controller. 2. Press the PS button to complete the connection, and it will go to sleep if you do not operate it for about 10 minutes. Press the PS button again to wake it up.Connect to PC: Connect the controller to your PC by USB cable and use it as a wired controller.Confirm the amount of electricity on the controller.Press the PS button and the light bar flashes, it will have power.If the light bar does not blink, please charge it for more than 30 minutes before connecting.When the product is connected to the p4 unit for the first time, make sure the product is connected to the USB data line in the shutdown state, then connect it to the p4 unit.The next time you use it, you dont need to repair it, so when you open the p4 host, press the p4 button to automatically pair it.
Before use:
Every time the controller connects to the P4 body, you need to knock down the left and right sticks and rotate the maximum around the edge of the stick, adjust the stick.Also, press the L2 and R2 buttons to the bottom to adjust the L2 and R2 buttons.
Note:
When pairing with the P4 unit, please do not touch the buttons other than the home button.
Reset: Use a fine needle to insert the eyelet on the back of the controller.