Feature

●❶TRRION N Series 20a mppt controller is a Tracer A/ANSeries update series that can be integrated into a variety of display modules and interface modules to meet various function requirements. It can automatically identify and read drivers in various modules
●❷The negative ground of this modular mppt controller can be widely used in a variety of applications such as communication bases, home systems, street lighting systems, field surveillance and RV solar systems
●3. 7 battery type selection seals (AGM), gel, water submersion, lead acid user, LiFePO4 lithium, Li(NiCoMn) O2 lithium, lithium user (9-34V). The dual 5V DC USB output interface of this mppt controller can charge electronic devices directly
●❹Real-time energy statistics function, display/change work parameters via APP or PC software via RS485 interface (optional) 4 levels of charging (bulk, absorb, float, equalization) and all-around electronic protection extend the life cycle of the battery
●❺Three indicators of different colors show PV/battery/load working status more intuitive The FIVE button allows you to adjust the system parameters more easily and view

[New | solar panels dedicated charge controller 20a]



[Triron3210+MT50]



[New | solar panels-only charge controller 30a.]



[Triron4210+MT50]




Description

■Function■

Advanced MPPT control algorithm rates and loss time to minimize maximum power point loss Advanced MPPT technology with efficiency of over 99.5%.High quality components to maximize system performanceConversion efficiency is 98%.Guaranteed ultra-fast tracking speed and tracking efficiency. Automatic limiting of charging power and current. Wide MPP operating voltage range.Multiple load working modes: Compatible with lead-acid and lithium-ion batteries with battery temperature compensation.Real-time energy statisticsOverheating Power Reduction Function: LCD and indicator to display operating data and system status. Easy to use buttons for comfortable and convenient operation.

MPPT 20a Solar Charging Controller, 12V/24V

■Function■

Model: TRIRON2210N mppt 20A Solar Controller System Voltage: 12 / 24VDC Automatic Work Rated Charging Current: 20A Battery Input Voltage Range: 8-32V Max PV Open Circuit Voltage: 100Vat Minimum Operating Environment Temperature: 92Vat 25 Ambient Temperature MPP Voltage Range: (Vbat + 2V) 72V Max. PV Array Power Supply: 260W / 12V; 520W / 24V Environment Temperature: -25C ~ + 55C (with LCD) / -30C ~ + 55C (without LCD) Lithium Battery: LiFePO 4(4S; 8S) / Li-NiCoMn (3S/6S) Self-draw current: ≤14mA(12V), 15 mA (24 V Temperature compensation: -3mV /°C / 2V Ground: General Negative Terminal/Wire Size: 6AWG (16mm2)

Various accessories available (optional)

RT-S (remote temperature sensor): obtaining battery temperature to compensate for the temperature of the control parameters, the standard length of the cable is 9.8 ft (3 m).(Not included, optional)Search B075YZS5TJ)

RS485 (USB to RS485 Cable) The USB to RS-485 converter is used to monitor each controller on the network using solar station PC software. Cable length is 1.5m.(Optional, lithium battery can be set up.Search B075JHYW5G)

MT50 (Remote Meter): MT50 can display various driving data and system faults.(Not included, optional)Search B075Z2DDQ3)

eBox-WIFI (WIFI Serial Adapter): After connecting the controller and eBox-WIFI-01 with a standard Ethernet cable (parallel cable), you can monitor the controllers operating status and related parameters via WIFI via mobile APP software signal.(Not included, optional) Android only, lithium battery can be set up.Search B07QRSJR45)

Note: All accessories are supported by purchase.

Installation Notes [Important]

How to connect your solar controller? Rotate the adjustment screw counterclockwise until the plate moves down. Peel off the cable tip about 8-10mm and insert the wire into the new opening between the plate and the terminal hole. Rotate the adjuster clockwise and the plate will move up and push the wire in the terminal hole. Make sure all the connections that interact with the controller are tight. IMPORTANT NOTICE: You need to charge the battery at least 60% before connecting to the controller. Always connect the battery Please do not connect the solar panel arrays to the controller without the battery. Do not exceed the input power and voltage

Module Design Solar Controller

Automatically identify and load drivers of various modules Supports hot-swap capabilities per module without damage Modular design for easy combination and replacement

Indicator: PV&Battery & Load Working Status Button: Display or set parameters LCD: PV Display Voltage / Current / Power Battery Display Voltage / Current / Temperature / Capacity Load: Display Controller Voltage / Current / Power / Load Working Mode Displays PC or APP Communicates with the controllers voltage/current/power consumption display inverter.

USB interface module: Dual USB 5V 2.2A USB output for electronics, Note: USB interface output when load is on. COM Port - RS485 Interface: Connect the controller as slave to PC or Phone Note: Computer software requires an accessory RS485 cable.Mobile app requires accessory WIFI box. Both accessories are not included in the package.