Feature

●Thickness: 0.4 inch (10 mm)
●Inner screw = Coarse [Pitch: Approx. 0.06 inch (1.5 mm)]
●Note on product images) This is a representative size image. Length of each part such as engraving, thread portion, pitch, etc. varies by size.
●Note: Please be sure to check the drawing for the size and other items.

[M12]

Description

■Shape: Enzart

Insert nut for reinforcing the screw part on soft materials such as aluminum and resin.
The inner and outer diameter of the tapping insert is threaded and has a cut blade such as a split groove and three-hole type.
No pre-tap is required for the bottom hole and is resistant to pulling and loosening
■ Thread Shape: Coarse

It is the most standard pitch in Japan as prescribed by ISO (International Organization for Standardization) standard. The most frequent distribution in Japan.
■Material: Stainless steel

Most representative stainless steel (equivalent to SUS304)
The strength is almost equal to "iron".
Excellent corrosion resistance and good mechanical properties.
Although it is normally not magnetic, it can harden due to cold processing, and it may cause magnetism.
■Surface treatment: fabric

Surface treatment/plating is untreated.
Therefore, corrosion resistance and appearance are the characteristics and color of the material itself.
Product Features:

338 Chip Free Type
● 3 round holes in the outer circumference are cut with a stop hole to seal the shavings inside.
● Although the particles may be slightly cut out when eating, the majority fits into 3 round holes (chambers) so there is no need to deal with the cutting process.
If your opponent is metal, please use the hole diameter at the maximum hole diameter.
Longer than the 337 model.