1. Before using the product, connect the power cable and put the switch on the battery holder to ON position.
2. Remote control code matching: There are 2 small holes in the battery holder (the code reset is the recovery button, leern is the code matching button). Use a sharp tool to hold the learning button until you hear a "Di" sound and then press the button with the small dots on the remote control until the lock sound is sounded, so the code will pair properly.
3. Password setting: factory password is 1, 2, 3, 4. The first step to change the password, hold the number key 8 first, and hold the lock key until the next sound is sounded. The second step is to enter. After the factory password 1, 2, 3, and 4, the lock key follows. The third step, enter the change password and press the lock key. Repeat the 4th and 3rd step. The new password is set successfully.
4.To lock the door outside the door, you need to enter the password and press the lock key or use the key to lock the handle and lock the door to prevent the door from opening.
Package Contents
1 x Remote Control
2 x Keys
1 x Button Box
6 x Screws