Feature

●The closed loop firmware stepper STM32 V2.0.bin can be updated via USB boot loader
●This allows you to use the USB serial port for set current, subdivision, calibration, and other parameters without using a screen
●The processor is 72 MHz main frequency, and the closed loop update frequency is 8 kHz, so it does not lose its high-speed printing
●15-bit high-precision magnetic encoder, with accuracy of over 0.1 degrees
●If you have any questions, please feel free to email us at any time. Thank you!


Description

If you have any questions, please feel free to email us at any time. Thank you!
An integrated encoder allows you to set documents, print parameters as you like!

The lamp is plug and play, but requires firmware that is supported for modification.

Support Chinese font, change the firmware of marine display Chinese menu.

The motherboard features an SD card and the files on the corresponding file can be printed on the LCD in the guest room.

Using STM32 chip, high frequency and high speed processing

Currently subdivided and parameters can be configured using a USB serial port or screen

Close loop updates frequency of 8 kHz, so you dont lose high speed printing

Input Voltage: 24V 12V

Configurable maximum current 1500mAh (42)/ 2500mAh (57)

Accuracy: Above 0.1 degrees

Micro: 1/2/4/8/16/32/64/128/256

Package includes:

1 x SERVO578 Module 57 Stepping Motor

1 x Motherboard Adapter

1 x 0.9 inch 7PIN OLED12864 Display

Cable included