Feature

●Thickness = 6mm x Length = 20mm
●Thread part = Full thread coarse [Pitch: Approx. 0.04 inch (1.0 mm)]
●Note on product images) This is a representative size image. Length of each part such as engraving, thread portion, pitch, etc. varies by size
●Note: Please be sure to check the drawing for the size and other items

[M10×45]

Description

■ Head Shape: Root Angle Bolt
The head part has a round head without a tool hole, and a square part on the bottom of the neck is the official name of the "Square Root Bolt".
When tightening, simply place the square part below the neck into the long hole of the mounting component, and stop the bolt and secure and rotate the nut side to tighten it. It has a round head, so it has cosmetic even after tightening, so it does not get caught and is safe and secure.

■ Thread Shape: Coarse [Full screw]
It is the most standard pitch in Japan as prescribed by ISO (International Organization for Standardization) standard. The most frequent distribution in Japan.
In addition, the "full screw" is the shape of all the threads from the tip of the head to the head seat.

■Material: Stainless steel
Most representative stainless steel (equivalent to SUS304)
The strength is almost equal to "iron".
Excellent corrosion resistance and good mechanical properties.
Although it is normally not magnetic, it can harden due to cold processing, and it may cause magnetism.

■Surface treatment: SS black
The surface is treated with a black dye, which is colored black with special chemicals.
The color is "matte tail black".