Feature

●The adapter that can be used by connecting the ice drill and electric drill, has also been improved 3 times to achieve the final evolution. Remove the handle of the ice drill and insert the ice drill electric bearing adapter, then you can drill ice holes with the electric drill
●The drop prevention mechanism has been changed to the shape of the previous model for a more secure design, and the fall prevention bar uses a soft touch EVA cover that is resistant to freezing. Built-in bearings allow the anti-drop bar to be safely without spinning together
●Long and super long 3 length for short length and thick ice fields. The length can be adjusted to 5 different levels of long and 7 Super Long lengths. The electric drill chuck part is compatible with 0.4 inch (10 Can also be attached to MORA standard folding handle. Uses nickel-chrome-molybdenum steel (SNCM439), which is the highest strength of alloy steel
●Precautions for Use: Please attach the drill chuck claws to the slit so that the drill does not fall off when ice passes. (Even if not installed correctly, the ice drill will rotate but will fall out when ice passes through. Impact driver cannot be used. We recommend drilling with a maximum torque of 18 V or higher than 70 Nm (70 Nm)
●Total length: 20.3 inches (514.5 mm); Shaft length: 17.9 inches (455.5 mm); Chuck part compatible diameter: 0.4 inches (10 mm); Standard weight: 2.9 lbs (1.3 kg); Body material: Nickel-chrome-molybdenum steel (SNCM439)

[Long]

[Short]

[Super Long]

Description