Feature
●Quantity: 10 Standard: mm
[1.50]
Description
Recoil Features
Regenerates a screw to a low cost holding power female thread.
You can replay the same size female threads before damage.
Stronger holding power than original female threads.
It can be used as a reinforcement part for female threads, so the base material can be reduced during the design process.
A wide variety of inserts and tools for female threads in various sizes and locations.
We provide the highest quality under strict control by ISO9001, ISO/TS16949 certification.
Recoil Effect
Recoil inserts show the effect of traditional threads.
The first three threads take over 75% of the load before inserting the insert, but the shear load is changed to the preferred "hoop stress radius load" when inserting the insert. This action creates stronger threads than original threads.
Recoil even with low strength materials such as magnesium alloy and aluminum alloys, you can use high strength bolts by inserting them into them, so the bolt size can be reduced and the weight of the parts.
From the Manufacturer
RECOIL Left Screw Recoil Kit
Description
Tool kit used to repair female threads (threaded holes)
The recoil insert uses diamond-shaped stainless wire.
The spring action will not work out after installation.
When inserting screws (male screws) will not cause damage to the thread, and the tightening force is increased.
Recreates the same size female threads before being damaged
Usage
Industrial machinery, automobile and motorcycle maintenance, repair, etc.
Cannot be used with holes that are not pierced.
Images are for illustrative purposes only.
PACKAGES
- Pre hole drill
- Insert Tool
- Magnetic folding tool
- Recoil Tap
- Recoil Insert (Standard: mm)
How to use 1
|
|
|
|
|---|---|---|
1. PerforatedRemove damaged threads with a drill for drilling Images are for illustrative purposes only. |
2. Pitch checkThe spacing of the screw is aligned with the bolts that are used. |
3. Recoil tap holderRecoil tap creates screw threads for inserting recoil inserts Remove debris after the recoil tap is raised and removed with air. |
How to use 2
|
|
|
|
|---|---|---|
4. Prepare for inserting toolsSet the recoil insert into the insert tool and adjust the tip of the tongue to the middle of the groove of the insert tool. The "Tang" is the surplus on the tip of the recoil insert. Images are for illustrative purposes only. |
5. Insert recoil insertWhile lightly pressing the vertical direction, turn the insert tool in the direction of the screw tightening, and insert the recoil insert 1/4 - 1/2 revolutions deep from the surface of the original material. |
6. Tongue foldingAfter removing the insert tool, fold the tongue. Insert the magnetic folding tool into the tongue and break when you hit it. The broken tongue sticks to the magnet so it can be collected as is. |
