Easy to install! Just hang on the ceiling and the floor! New sensory TV installation with tension rods; Product Point: TV wall mount kit using lightweight aluminum poles / 6 earthquake tests have been conducted to ensure vibration resistance / Pole weight is only 3.5 lbs (1.6 kg). Free lock tilt function allows you to adjust the angle up and down at any time without any tools. Easy installation that clicks when pushing it in.

Japanese instruction manual and all necessary screws are included. Installation method: 1. Stand up 2 poles to match the plate. 2. Attach the dedicated attachment and plate. 3. Attach the monitor bracket to the TV and hang the TV on the plate. The included wrench will be firmly secured by hand. Just stretch the pole with your hands to make it not sufficient strength and it is not firmly secured. Be sure to tighten the height adjustment bolt until the spring is hidden.

(Installation Point) Poles are positioned due to the nature of the product, the ceiling will be greatly applied. Install the poles in places with beams in the ceiling, or in places with a solid foundation such as rebar concrete. It can be installed on two beams. If you have an inch module (406 mm pitch), a measuring module (455 mm pitch) can be installed on two beams. Meter modules (500mm pitch) will not allow the plate to be installed on two beams because the length of the plate is not sufficient.

Please make sure you do not mind before purchasing! Professional Vibration Testing: One of the concerns of our customers when hanging on a TV is being seismic resistant. This product has been tested to replicate the earthquake waveform of a 7 earthquake that was observed during the East Japan earthquake, and we perform an authentic safety inspection that stands out from the customers perspective to provide you with the peace of mind possible. (Safe return product) If it meets the following conditions but cannot be installed, we will respond to return. There is a screw hole on the back of the monitor • The stand can be removed (some TV models with built-in stands) • The back of the monitor is flat • Monitor size is 26 to 46 inches • The weight of the monitor is less than 33.9 lbs (15 kg), and the distance between the screw holes on the back of the monitor is within the "Height: 3.9 - 8.75 inches (175 inches (175 inches (45 inches (45 inches (45 mm).