For LCD TV only! TV Wall Mount with Arm is movable, so you can freely angle the screen. Product Features: The angle can be adjusted from up to up and down ± 15 degrees, left and right ± 50 degrees (until it touches the wall). The screen is on the front of the screen. All in one metal fixture.

Comes with an arm so you can adjust the angle freely when you need it. The thickness of 1.1 inches (27 mm) makes it unobtrusive to the wall. The horizontal adjustment of the screen can be corrected immediately by ±5 degrees.

Japanese instruction manual and all necessary screws are included. [Installation Instructions] 1. Attach the monitor bracket to the back of the TV. 2. Install the base plate and cover, 3. Hook the monitor bracket to the base plate. Push screws against each stud. Slim type hardware that does not take up any width. Cannot be installed across 2 studs.

Please make sure you do not mind before purchasing!

Professional vibration testing.

One of our customers concerns when hanging your TV is "shockproof".

This product conducts vibration waveform testing that reproduces the possible earthquake waveform of 7 earthquake that was observed during the East Japan earthquake,

We do real safety tests on our customers perspectives to let you know you can rest as much as possible.

[Safe return product]

If it meets the following conditions but cannot be installed, we will accept returns

There is a screw hole on the back of the monitor.

The stand can be removed (some TVs with built-in stands)

The back of the monitor is flat.

Your monitor size is 26 - 46 inches.

The weight of the monitor is less than 44.1 lbs (20 kg).

The distance between screw holes on the back of the monitor is within the range of 3.9 x 3.9 inches (100 x 100 mm), 3.9 x 7.9 inches (100 x 200 mm), 7.9 x 7.9 inches (200 x 200 mm) (VESA compliant).