For LCD TV only! TV Wall Mount Bracket: Rotates 360° up and down, left and right, freeing your TV screen. Product points: The angle can be adjusted up and down ± 15 degrees, left and right ± 60 degrees (until it touches the wall). The screen can be rotated 360 degrees, so it is easy to adjust horizontally. Compatible with VESA standards with genuine metal fittings. It is affordable and cost-effective.

Adjusts for comfort When the horizontal slide, the arms may bend slightly depending on the weight of the TV, as the adjustment is made to be played on the arm joints.The TV level may shift depending on the angle of the arm, so please adjust the horizontal level according to the 360 degree rotation. Freelocks need to be adjusted pre-adjusted and must be adjusted in advance to achieve freelock tilt.There are 3 adjustable parts, so please tighten it evenly with the included hex wrench.

Japanese instruction manual and all necessary screws are included. [How to install the TV] 1. Install the monitor bracket on the back of the TV, 2. Mount the base plate, 3. Hook the monitor bracket to the base plate, and secure the monitor bracket to the base plate. Push screws against each stud. Slim type hardware that does not take up any width.

Please make sure you do not mind before purchasing! Professional Vibration Testing: One of the concerns of our customers when hanging on a TV is being seismic resistant. This product has been tested to replicate the earthquake waveform of a 7 earthquake that was observed during the East Japan earthquake, and we perform an authentic safety inspection that stands out from the customers perspective to provide you with the peace of mind possible. (Safe return product) If it meets the following conditions but cannot be installed, we will respond to return. There is a screw hole on the back of the monitor • The stand can be removed (some TVs with built-in stands) • The back of the monitor is flat • Monitor size is 13 to 32 inches • The weight of the monitor is less than 33.9 lbs (15 kg), and the distance between the screw holes on the back of the monitor is within the "75 mm x 75 mm, 100 mm, 100 mm, 100 mm x 10 mm x 10 mm x 10 mm (VESA compatible" range.