For LCD TV only! TV Wall Mount Bracket, 0.9 inch (22 mm) ultra-thin metal fittings for a beautiful finish. Product Highlights: 0.9 inch (2.2 cm) thickness for outstanding finish; The product is No.1 with a thin finish. Fits most TVs if the back of the TV is flat and has 4 screw holes. Installation points: A long screwdriver is required when tightening the safety lock bolt.Prepare in advance.

Japanese instruction manual and all necessary screws are included. Installation method: 1. Attach the monitor bracket to the back of the TV. 2. Mount the base plate. 3. Attach the monitor bracket to the base plate. Can be attached to the 2 post posts. In either the case of 16.9 inches (406 mm) (inch module), 1.8 inches (45 mm) (500 mm) (mm) (5 mm) (mm) (mm) (mm) (mm) (mm) or meter module), you can securely mount the studs).

Caution for Wiring (1) If you hang your TV with a slim type metal fitting, the back of the TV and the wall will become very narrow, so please be careful when wiring. Side wiring and downward wiring are beneficial for slim installation. Caution for Wiring 2. If you plug the cord straight into the back of the TV, you can use the spacer included with the product to expand the gap between the wall or use the L-shaped plug to keep the cord down.

Please make sure you do not mind before purchasing! Professional Vibration Testing: One of the concerns of our customers when hanging on a TV is being seismic resistant. This product has been tested to replicate the earthquake waveform of a 7 earthquake that was observed during the East Japan earthquake, and we perform an authentic safety inspection that stands out from the customers perspective to provide you with the peace of mind possible. (Safe return product) If it meets the following conditions but cannot be installed, we will respond to return. There is a screw hole on the back of the monitor • The stand can be removed (some TV models with built-in stands) • The back of the monitor is flat • Monitor size is 46 to 65 inches • The weight of the monitor is less than 99.4 lbs (45 kg); The distance between the screw holes on the back of the monitor is within the "Height: 3.0 - 23.6 inches (75 inches (75 inches (600 mm).