For LCD TV only! TV wall mounting bracket with super long arm allows you to freely adjust the angle up and down to left and right. Product points: The angle can be adjusted up and down ± 15 degrees, left and right ± 90 degrees (until it touches the wall). Excellent strength even with a single arm.

Check Point Before Purchasing: Confirm the folding position When the arm is folded and placed on the wall, the center of the base plate and the TV will be separated. Please be careful when installing. If the horizontal position is misaligned, the TV level may shift depending on the position of the arm. In that case, you can adjust the horizontal level as the metal fittings.

Japanese instruction manual and all necessary screws are included. [How to install the TV] 1. Install the monitor bracket on the back of the TV, 2. Mount the base plate, 3. Hook the monitor bracket to the base plate, and secure the monitor bracket to the base plate. Installation across the two studs may vary depending on the building module. inch modules, but for scale modules and meter modules we recommend wall reinforcement.

Please make sure you do not mind before purchasing! Professional Vibration Testing: One of the concerns of our customers when hanging on a TV is being seismic resistant. This product has been tested to replicate the earthquake waveform of a 7 earthquake that was observed during the East Japan earthquake, and we perform an authentic safety inspection that stands out from the customers perspective to provide you with the peace of mind possible. (Safe return product) If it meets the following conditions but cannot be installed, we will respond to return. There is a screw hole on the back of the monitor • The stand can be removed (some TV models with built-in stands) • The back of the monitor is flat • Monitor size is 37 to 65 inches • The weight of the monitor is less than 70 kg • The distance between the screw holes on the back of the monitor is within the "Height: 3.0 - 15.70 inches (75 inches (75 mm).