Feature
●Material: Main Body Material: ABS (Acrylonitrile Butadiene Styrene) Resin; Probe Material: Stainless steel (SUS 304), rust resistant
●Integrated Waterproof: This is a waterproof digital thermometer with integrated display and sensing parts. It can be used to detect the temperature of water in the bath, the temperature of the aquarium,
●Easy to read and operate: It takes only seconds to measure the temperature. Use the hold function to display the temperature of the measurement fixed and easy to read. You can check the maximum and lowest recorded temperature
●Probe Cap Included: The probe cap can also be used as a handle in addition to protecting the probe
●Wide range of uses: It can be measured in a wide range from 122°F to 300°C, so it is recommended for use in baths water temperature, soil temperature, experiments and temperature control of your aquarium
[set of two]
Description
Product Specifications:
Sensor Type: Thermistor
Body Material: ABS (Acrylonitrile Butadiene Styrene) Resin
Probe Material: Stainless Steel (SUS 304)
Probe Size: Φ0.16 x 5.6 inches (4.0 x 142 mm)
Tip diameter: Φ2.5mm
Measurement range: 122 - +88°F (50 - 300°C).
Resolution: 0.1°C
Measurement accuracy:
±1 °C (10.0 - 100.0 °C)
±2℃ (2℉ 50.0~10.1℃, 100.1~200.0℃)
±4℃(200.1~300.0℃)
Sampling: 1 time per second
Operating temperature and humidity: 32 - 122°F (0 - 50°C) without condensation.
Storage temperature and humidity: 65°F - 145°F (20 - 65°C), no condensation.
Display: LCD display, unit "°C" / overrange display "HI" and "LO"
Power supply: LR44 (1.5V) button cell battery x 1 (built-in)
Waterproof: IPX7 compliant
Dimensions (W x H x D): 1.2 x 10.2 x 0.6 inches (30
Weight: Approx. 1.3 oz (37
Four button function
①Power button:
When turning on the power, press the power button. "Current Temperature" is displayed.
Press the power button to turn off the power. Turn off and power off.
② Highest/Minimum Button:
Maximum Temperature (MAX): The "MAX" will be illuminated on the display area, and the highest temperature measured to be displayed.
Minimum Temperature (MIN): The "MIN" will light up on the display area, and the minimum temperature measured before that time is displayed.
3. Hold button: Fixed temperature display mode for easy reading.
4. Reset button: Press and reset if the device does not work properly, due to malfunction or any abnormalities.
Note
This product has a waterproof structure, but please do not place it in a location that gets wet with water for a long time.
The waterproof performance of this product is IPX7 compliant, and it can be submerged quietly to a depth of 3.3 ft (1 m) of static water, and retains its waterproof performance for about 30 minutes.
When the product gets dirty, please wash it lightly with water without rubbing it. If it is very dirty, you can use a sponge or a mild detergent to wipe it gently.
Do not use abrasives or volatile solutions such as alcohol, thinner, benzene, will damage the surface finish or cause poor functionality or malfunction.
Package Content:
2 x Waterproof thermometer
2 x Probe Caps
2 x LR44 button batteries (built-in)
2 x Japanese instruction manual (English language not guaranteed).