[303000080.112]

Features:

Unlike coil-type inserts, no front tap is required.
Not only does it require a front tap, it also has self-locking function for metal materials, resin and wood, so it is resistant to looseness due to the removal of the screws.
In addition, it can achieve the abrasion resistance and high pulling strength required for any partner. The threads between the split grooves (or three holes) are weaky depending on the taper angle, so they work to bite the reverse direction of the enzart.
The wall is thin and the outer diameter is smaller than the 302 model.
● Suitable for space constraints
The pitch of the inner and outer screw is the same.
Use tools for small outer diameter 610, 1 and 620 1 type tools. (610 and 620 type tools can be used)
The outer diameter is small, so the strength of the various types is reduced than the 302 model.
If inserted into metal material, it may break.
[Use]

Enzart is mainly used for aluminum alloy materials and all plastic materials commonly used for screw stubborn with direct taps.
● Compensates for the mechanical strength of the relatively low strength thread material and acts as a reliable fastening part.
Specifications:

Inner screw: M5
Outer screw outer diameter: 0.3 inches (7 mm)
Outer thread pitch: 0.03 in (0.8 mm)
Total Length: 0.3 inches (8 mm)
Reference hole diameter/resin: 0.25 - 0.26 inches (6.3 - 6.6 mm)
Reference hole diameter/light metal: 0.26 - 0.27 inches (6.6 - 6.7 mm)
Material: Kirei steel trivalent chromate