Feature

●The LED indicator allows you to adjust the flow rate, and it has water defense and memory when power off. Amphibious pump, can be used under water (according to installation instructions)
●The coil uses pure copper enamel wire to reduce temperature rise, and extend its life. Enameled wire coil and circuit board are sealed with epoxy resin
●IP68 waterproof, can be fully submerged in water. Removable design makes it convenient to clean work
●Use the filter to avoid filling the inlet
●Small size, high efficiency and low noise. Four rubber suction cups on the bottom can be adsorbed on smooth surfaces and reduce noise and vibration. Suitable for aquariums, fountains, car cooling, computer water cooling systems and circulation systems


Description

This is a mini submersible water pump. It features a brushless motor that provides a smooth and quiet operation than a non-brushless water pump.

Features:
Brushless pump, permanent magnet rotor, maintenance free
Enameled wire and circuit board are sealed with epoxy resin.
The coil uses pure copper enamel wire, lower temperature rise and longer life.
Amphibious pumps can be used underwater or submersible (follow installation instructions)
USB DC 5V input, very convenient for power supply.
LED indicator flow adjustment and memory function when power off.
No water protection.
IP68 waterproof grade, fully submersible
Removable design, convenient for cleaning
With filter, do not fill the inlet.
4 rubber suction cups on the bottom can be adsorbed on smooth surfaces and reduce noise and vibration.
Small size, high efficiency, low noise
Suitable for aquarium, fountain, car cooling, computer water cooling system, circulation system.

Note:
1. Please check the voltage and power of the pump power before turning on the power supply.
2. Turn off the power before putting the pump into water / inserting it in / taking it out. Otherwise, the pump cannot drain water due to air.
3. It can be used with water or other liquids (no particles and impurities); Not for use with viscous acid-based liquids.
4. Do not burn the pump dry It may be damaged.
5. Turn the power supply on and off several times to eliminate the air in the pump impeller and pipe.

Specifications:
Color: Black.
Pump Material: PC + ABS
Rated voltage: USB DC5V
Maximum Power Supply: 4.8W
Max Current: 960mA
Maximum Flow Rate: 78.6 gal (300 L) / H
Max lift: 300cm / 9.84ft
Noise: less than 37dB
Lack of water protection:Yes
Outer Diameter Inlet/Outlet: 0.33in (8.5mm)
Inner Diameter Inlet/Outlet: 0.24in (6 mm)
Waterproof class: IP68
Maximum liquid temperature: 140°F (60°C).
Cable Length: 59in (150 cm)
Product Size: 59.5 * 49 * 42 mm / 2.34 * 1.9 * 1.65 in
Product weight: 3.32oz (94g).
Package Size: 2.56 x 2.36 x 2.12 inches (6.5 x 6 x 5.4 cm).
Package Weight: 3.67 oz (104 g).

Package List
1 x DC 5V brushless pump.
1 x Filter
1 x User Manual (English)