Feature

●Effect: The screw has a large pulling resistance and a wide grip range. Can be used to assemble uneven surfaces
●Instructions: 1. Drill a hole to the recommended diameter. 2. Tap the anchor to the hole until the anchor is flush with the surface of the board. 3.Install the setting tool to the screw head. Squeeze the trigger to expand the anchor. (Small size can be set with a screwdriver) 4. Remove the screws, thread the fixture and then put it back into the anchor. Tighten the screws until the fixture is fixed
●【Size Chart】Screw Length: 25mm / 0.98 inch, Bushing Length: 18mm /0.71 inch, Hole Diameter: 10mm / 0.39 inch (M5); 12mm / 0.47 inch (M6)
●(Quality Assurance): In the event of an initial defect, please feel free to contact us. We will do our best to make you satisfied
●Easy to use: Can be installed quickly by hand or using pneumatic tools

[M5X25]

[M6x25]

Description

20 x Jack Nuts Hollow M5 M6 Tool Nuts Tindabot Petal Nut Expansion - M6x25