Feature

●Screw Cutting Tap Set: The Screw Cutting Tap Set is a special tool for removing broken bolts, broken screws, and removing screw heads. Suitable for removing screws and damaged screw nuts from hard wood or wooden desk
●High Hardness Screw Removal Tool: HSS steel (high-speed alloy tool steel) is durable and abrasion resistant, and is a set of screw cutting taps that can be used with crushed wood and small screws, as well as damaged flat screws, hex screws, or painted screws, or damaged screws
●How to Use: Install the screw size suitable for the bit holder. (#6 to #10 will be attached to the bit adapter before connecting to the bit holder) Drill holes into screws. Place the appropriate Ex screw on the size of the drilled hole. 4. Rotate the reverse to remove the screws. Apply firm pressure while reversing at a low speed. Faster speeds may cause drilling holes to be broaden. Remove slowly at even speed until the screws are removed
●(Contents) Standards: #1: For screw diameter 0.2 - 0.5 inch (6 - 12 mm), #2: Screw diameter 0.2 - 0.4 inch (5 - 10 mm), #3: For screw diameter 0.1 - 0.3 inch (4 - 8 mm), #5: Screw diameter 0.1 - 0.2 inch (3.2 inch (3 inch (5 inch (6.5 - 6.5 inch (6.5 - 6.5 - 6.5 mm), #8 - 6.5 mm) 3.5-diam. 5.5mm, #9: 2.5-4.5 Thread Diameter Diameter #10: 2-3.5 Thread Diameter 1 x Adapter, 1 x Bit Holder, 1 x Storage Case
●(Precautions) Keep out of reach of children. Hammer drill mode cannot be used. Please use with electric drills. Please use the product correctly and safely. Please wear protective glasses or gloves when working. Please note that all screws are not removable, and there may be rare cases of lost bits due to bonded screws and bolts. Do not use with impact wrenches or impact drivers. (Impact will cause the tip of the bit to chip easily. Depending on your monitor and environment, the color of the actual product may differ from the images. Product specifications and packaging may change without prior notice. After inspecting the product from the import source, it is sold unopened, so there may be cases where product defects


Description

Can be used with crushed wood screws, machine screws, damaged flat screws, hex screws, or painted screws, broken screws.
Attaches to an electric screwdriver to remove damaged screws efficiently.
Suitable for DIY and general construction work.

Highlights:
20 screws for any situation.
It can be firmly fixed to prevent them from falling apart.

Connect #6 to #10 to use with the included adapter.

The included bit holder is compatible with most electric drills.


How to use
1. Install the screw size suitable for the bit holder.
(#6 to #10 is attached to the bit adapter and then connect to the bit holder)

2. Drill a hole in the screws.

3. Place the appropriate Ex screw on the size of the hole you have made.

4. Rotate the reverse to remove the screws.
Apply firm pressure while reversing at a low speed.
Faster speeds may cause drilling holes to be broaden.
Remove slowly at even speed until the screws are removed.

Product Details:
Size (W x D x H): Approx. 5.9 x 3.9 x 1.6 inches (150 x 10
Weight: Approx. 8.1 oz (232 g).
Material: HSS
Set Includes:
10 x Screw Dr, 10 x Screw Ex, Bit Holder, Adapter, Storage Case
Instruction manual not included.

[Precautions]
Keep out of reach of children.
Hammer drill mode cannot be used.
Please use with electric drills.
Please use the product correctly and safely.
Please wear protective glasses or gloves when working.
Please note that all screws are not removable, and there may be rare cases of lost bits due to bonded screws and bolts.
Do not use with impact wrenches or impact drivers. (Impact will cause the tip of the bit to chip easily. )
Depending on your monitor and environment, the color of the actual product may differ from the images.
Product specifications and packaging may change without prior notice.
After inspecting the product from the import source, it is sold unopened, so there may be cases where product defects.