[M6×P1.0]

[M5×P0.8]

[M8×P1.25]

[M12×P1.75]

[M4×P0.7]

Recoil Kit (Screw Thread Repair Kit)

You can play the screw holes that have been crushed (squished) in the same size as before repairing.
It also creates a female thread in plastic or soft metals
Can also be used to protect threads from wear and tear.

High Speed Steel
Made of high speed steel with excellent abrasion resistance and heat resistance, so it can be used with steel, casting, iron,
Ideal for repairing damaged aluminum threads.

Can also be used as a reinforcement part:
It can also be used as a reinforcement to regenerate the threads by inserting the coil.

How to Use:
1. Sharpen damaged screws with a special drill.
2. Make sure the bolts and taps are the same pitch,
Tap to cut the screw into the drill hole.
3. Insert the tongue of the coil into the groove of the insert tool to attach and secure the coil.
4. The length of the coil can be adjusted by moving the color of the insert tool,
Screw the coil into the threaded threaded with a tap.
5. Place the lug break tool on the tongue and knock it sharp to remove the tang.
6. Remove the tang and allow the screw holes to be used.

Please refer to the images for detailed instructions.

Size: M8 x P1.25
Set Contents:
Drill
Tap
Lug break tool
Insert tool
Dedicated case.
Insert coil

This product is an overseas product, so there may be some scratches, dirt, etc.
Please be aware of this before purchasing.
The size of the included hex wrench may not fit.

About Warranty:
We have established a return and exchange policy that is almost identical to .
Please return request and return to us within 30 days after the product arrives.
We accept returns via [Order history]. Please choose 【Return or Exchange the product】.
In addition, please understand that if you return it due to the customers preference, the shipping fee will be borne by the customer.