Feature
●Negative Grounding MPPT Solar Charging Controller Tracer 1210AN, advanced MPPT control algorithms this 10 amp MPPT controller tracking efficiency exceeds 99.5%
●Built-in LCD screen shows the major charging parameters. Multiple connection options on the controller (remote meter, mobile app, PC software, etc) allow users to customize each charging phase, use specific parameters to create a user-defined battery type and access exclusive settings
●Compatible with multiple battery types for convenient use, supports sealed lead acid, gel, submersion, lithium and users
●RS-485 communication bus interface and Modbus communication protocol available to meet various communication requirements in different situations
●Modbus communication protocol interface operates at full load without losing capacity within the working environment temperature, so it is convenient for expanding and monitoring applications in a variety of fields, such as communication bases, home systems, street lighting systems, and wild surveillance systems
[Tracer4210AN+MT50+RTS+RS485]
Description
Tracer AN Series Based on the general negative design and advanced MPPT control algorithm, the LCD shows the working status, this product is artistic, economical, and practical.Charging power and current limiting function and reduced charging power can automatically improve the stability of connecting oversized PV modules or working at high temperatures, increase the professional protection chip of communication ports, further increase reliability, and adapt to a variety of applications RequirementsAdaptive 3-stage charging mode based on digital control circuitry. This modular solar controller can be widely used in a variety of applications such as communication stations, home systems, field monitoring, etc.
The communication port adopts a professional protection chip that can supply 5VDC power supply. The RS-485 communication bus interface and Modbus communication protocol can meet a variety of communication requirements in different situations.Monitor and set parameters via mobile phone app or PC software. Full load operation without reducing capacity within working temperature range.
Advanced MPPT technology with more than 99.5% efficiency to minimize maximum power point loss rate and loss time Advanced MPPT control algorithms Wide MPP operating voltage range High quality and low failure rate ST and IR components internationally famous brands are used to ensure the service life of the product.Compatible with lead-acid and lithium-ion batteries; Wide range of electronic protection charging power and current limiting function; Battery temperature compensation; Real-time energy statistical function; Overheating power reduction function.
- System Voltage: 12 V / 24 V automatic operation
- Maximum PV Open Circuit Voltage: 100V
- Consumption: ≤12mA
- RS485 Communication Interface: 5VDC / 100mA
- Grounding Type: Negative Ground
- Multiple load work modes
The connection order of the controller is battery-load-solar panel, which disconnects the system in the reverse order of solar panel-load-batteries.
Note:
When wiring the controller, do not close the circuit breaker or fuse, make sure the lead of "+" and "-" poles are properly connected.On the battery side, the fuse is 1.25 to 2 times the current rating of the controller should be installed within 150mm from the battery.If you connect the inverter to your system, please connect the inverter directly to the battery, not the load side of the controller.
|
|
|
|
|
|---|---|---|---|
MPPT Solar Charging ControllerCompatible with 12V/24VDC automatic operation up to 100V PV open circuit voltage lead acid and lithium-ion batteries; Advanced MPPT technology with over 99.5% efficiency |
MT-50Wide LCD screen displays real-time operating data and working status in digital, graphic, and text formats.Basically used to monitor and configure the controller, it automatically identifies the type of solar controller, model, and related parameter data. |
RS485USB to RS-485 converter is used to monitor each controller on the network and update firmware using Solar Station PC software.Cable length is 1.5m. |
RTSGetting the battery temperature to compensate for the temperature of the control parameter, the standard length of the cable is 9.8 ft (3 m).The RTS300R47K3.81A connects to the port of the controller.Note: When you unplug the RTS, the battery temperature is set to a fixed 25ºC. |
|
|
|
|
|
|---|---|---|---|---|
| 1210AN+MT50+RTS+RS485 | 2210N+MT50+RTS+RS485 | 2215BN+MT50+RTS+RS485 | 5415AN+MT50+RTS+RS485 | |
| Nominal voltage of the system | 12/24 VDC automatic operation | 12/24 VDC automatic operation | 12/24 VDC automatic operation | Automatic operation of 12/24/36/48 VDC |
| Rated Charging Current | 10A | 20A | 20A | 50A |
| Battery voltage range | 8-32V | 8-32V | 8-32V | 8V-68V |
| Maximum PV Input Power | 130W/12V 260W/24V | 260W/12V 520W/24V | 260W/12V 520W/24V | 625W/12V 1250W/24V 1875W/36V 2500W/48V |
| Maximum PV Open Circuit Voltage | 100 V / 92 V (at 25 °C) ambient temperature). | 100 V / 92 V (at 25 °C) ambient temperature). | 150 V / 138 V (at 25 °C) ambient temperature). | 150 V / 138 V (at 25 °C) ambient temperature). |
| home consumption | ≤12mA | ≤14mA(12V); ≤15mA(24V) | ≤60mA(12V); ≤30mA(24V) | 98mA/12V;60mA/24V;50mA/36V;46mA/48V |
| Temperature compensation coefficient | -3mV/℃/2V (Default) | -3mV/℃/2V (Default) | -3mV/℃/2V (Default) | -3mV/℃/2V (Default) |
| Ground | Negative | Negative | Negative | Negative |
| Communication | RS485 interface | USB / RS485 / Relay Interface | RS485 (RJ45 Interface) | RS485 (RJ45) |
| Battery Type | Lead-acid batteries (sealed (default)/gel/submersion/user) and lithium-ion batteries | Lead-acid batteries (sealed (default)/gel/submersion/user) and lithium-ion batteries | Seal (default) / Gel / Water immersion / User | Lead-acid batteries (sealed (default)/gel/submersion/user) and lithium-ion batteries |