Description:
- Constant Current/Buck Module with 5A MPPT Control
- Effectively reduces solar charging time.
- Up to 95% conversion efficiency and improved charging efficiency.
- Can charge batteries, lithium batteries, etc.
- A variety of digital products that drive high power LED as a cell phone power source or car power supply.
Specifications:
- Properties: Non-insulated back module
- Input Voltage: 6-36V
- Output Voltage: 1.25-32V continuous variable (default output 5V)
- MPPT Voltage Setting: 6-36V
- Output current range: 0.05~5A (default output current is 3A, long time within 3A)
- Turn light output range: 0.01~5A (default is 0.3A) The current range will be a little different due to the variance of the parameters of the part.
- Multi-function double display: input voltage, output voltage, output current, output power
- Operating Temperature: -40 to +85 degrees
- Operating frequency: 180KHz
- Conversion efficiency: up to 95% (efficiency involves the difference in input voltage, output voltage, current and voltage)
- Short circuit protection: Yes
- Over temperature protection: Yes (automatically shut off output after overheating)
- Input Reverse Polarity Protection: No (Add a string to the diode if needed)
- Anti-output irrigation protection: no, output must be connected to battery plus blocking diode. Otherwise, the module will burn out.
- Charging indicator: red when charging, green when charging is complete. When using the solar panel to supply power, the small solar charging current is very small, it will be smaller than turning the light current, green light, but not full. Please be careful to distinguish this difference.
- Installation: 3mm Screws (4)
- Connection: Terminal, In Input, Out Output
- Size: 60 * 31 * 22 mm (L * W * H)
Package Includes:
1 Piece MPPT DC-DC Back Converter
Note:
Current detection module is low end test, so please do not connect the input negative directly to output negative!