Description:
In the process of circuit signal transmission, the voltage signal will increase when the transmission distance is weak. Using the current transmission can avoid signal weakening. This module is used for the end of the current signal transmission and signal to the voltage signal for single chip detection. Current input support 4-20Ma,0-20mA,Voltage output support 0-3.3V 0-5V 0-10V
Features:
Wide supply voltage range, output voltage support multiple range
Zero and range can be adjusted
High stability, good linearity, industrial grade
High precision color resistance, high precision, low temperature drift, high power current signal sampling resistance
Instructions:
1 Module according to wire definition, power supply voltage 7-36V (if output is 10V, the supply voltage must be larger than 12V)
2. The D2 indicator should be lit after the power is turned on. Otherwise, please check the line connection. Board with reverse protection, reverse will not burn
Select the right range via jumper caps, if needed:
4--20ma: 0-2.5V Range: J11,2ft Short, 3,4ft Short
0-3.3V Range: J1 1,2 feet off, 3,4 feet off
0-5.0V Range: J1 1,2ft Short, 3,4ft Short
0--10.0V Range: J1 1,2ft Short, 3,4ft Off
0--20ma: 0--3.3V range: J1 1,2ft short, 3,4ft short
0-5.0V Range: J1 1,2 Short, 3,4 Short
0--10.0V Range: J1 1,2ft Short, 3,4ft Off
Size: 4.2 x 2.5cm / 1.65 x 0.98inch
Quantity:1PC
Note:
Please allow 1-3mm error due to manual measurement. pls make sure you dont mind before you bid