[bule indicator]
[green indicator]
[red indicator]
[Note]
Please check the product for compatibility.
Please check if it can fit your bike
If you have any questions, please feel free to contact us.
Features:
1.Gear display fast and stable;
2.Compact size;
3. Plug and Play Easy to install with just plug and play;
4.Durable design, waterproof and windproof;
5. Bright and easy to read numbers
Specifications:
★ Fitment: EFI Motorcycle
★ Color: Black
★ Size: Approx. 1.2 x 0.8 x 0.5 inches (30 x 20 x 13 mm).
★ Cable Length: 170cm
★ Installation Tips: We recommend that you install it according to the holder.
★ Package Includes: 1 x Digital Gear Position Indicator 1 x Instruction Manual 2 x Double Sided Tape 4 x Cable Ties
[After sales service]
Online installation support provided.
Installation Instructions:
Instruction Guide:
You need to connect 4 wires to your bike wire harness. Good quality fast connectors are supplied (4 wire faucets) No wire cutting or soldering.
All connections can be performed under the fuel tank, in the ECU box, or behind the instrument cluster.
The table below provides a summary of connections.
GFYSHIP Wire
Red + Connect to 12V Switch Power Cord
Connects to Black Ground Wire or Chassis
White speed signal, tap between speed sensor and meter panel.
For some ABS models, tap the speed signal anywhere between the ABS computer and ECU box.
Connect to the green Tacho signal and tap any place between the ECU box and meter panel.
Or tap the signal line from 2-wire
Crankshaft sensor (pickup coil), anywhere between sensor and ECU box.
It is recommended to consult a seller or refer to your bicycle service manuals to complete the installation.
Due to the number of bike models and vehicles compatible with this kit, the model-specific wire color and installation instructions are not explained in this document.
1.Ignition key should be in the OFF position. Remove seat and lift fuel tank to support
2. Find the speed sensor coupler.
A. Most motorcycles have a speed sensor installed on the derailleur. Other people install the sensor on either the front or the rear wheel.
B. Track the cable until the speed sensor coupler is find. This is a 3-pole connector (except BMW that uses 2 poles).
C. If you have any doubt, please check the service manual of your bike or contact the seller with the position of the speed sensor coupler.
For KTM EXC 250 NON FI MODEL ALL YEARS
For KTM EXC 300 NON FI MODEL ALL YEARS
For KTM EXC 400 NON FI MODEL ALL YEARS
For KTM EXC 450 NON FI MODEL ALL YEARS
For KTM EXC 500 NON FI MODEL ALL YEARS