[bule]

[sliver]

[golden]

This product was developed with thorough consideration to ease the imperfections of traditional models that are thin, light, and difficult to peel.
This is an ultra-lightweight model with its own development.
Compared to the traditional rim guard weighs approximately 11.3 oz (330 g), this unique model is about 7.1 oz (200 g).
Due to its lightweight nature, the biggest disadvantage of not being able to withstand centrifugal forces and is prone to peeling off like traditional rim guards.
Uses 3M double-sided tape.
The double-sided tape is made of 3M material for added protection against peeling.
Includes 4 adhesives
4 included to allow you to use 1 adhesive agent for each wheel with thorough adhesion.
Includes 5 seam stickers.
Includes 5 elliptical transparent seals, which alleviate the peeling caused by dirt from the seams.
Please use it at joints according to your preference.

Color: Red, Gold, Silver, Blue
Size (approximate): Length 26.6 ft (8 m), Width 0.4 inch

Installation Method:
1. Make sure the temperature is 15 degrees. (We recommend using it indoors during winter.)
2. Clean the target area and allow it to completely degrease and dry. Even a little amount of moisture, oil, coating, or wax will not stick to it.
3. Apply the included adhesive agent to the desired area.
4. If necessary, warm up with a hair dryer or similar to the rim guard while reshaping and sticking. (Cut at the last seam you pasted it will be wasteful)
5. Firmly press and peel off the protective film. (Please install it with a feeling of removing slight floats and gaps)
6. Stick the included transparent sticker on the joint as you like. (This is a temporary and simple seal to prevent dirt and dust from entering.
7. Please do not get wet in water for about 24 hours after installation. Please do not touch or ride in the meantime.
8. Check regularly for peeling and floating.

Please work in environments with a temperature of 59°F (15°C).
This will affect the decreased paste force, so please thoroughly degrease the target object.
This product is not unconditionally protected from any scratches that may be received.
Please refrain from running for 24 hours after installation. Please do not use 48 hours for high speeds.
Compared to conventional models, it means that it is not easy to peel off.
We do not guarantee any damage caused by peeling off (including double-sided tape on the product side).
We do not guarantee any problems caused by the product.
In order to check the double-sided tape, we may lightly peel the rim guard off the seams as this may cause peeling. Please do not touch it for 24 hours after firmly pressing it.
Compared to conventional models, the shock absorption capacity is low.
The product is thin and may be deformed during delivery.
Lightly heat with a blow dryer and put it back into place.