Feature
●(Voltage Display & Power Switch Included) Equipped with a voltmeter that allows you to observe the battery voltage and USB voltage of your motorcycle at a glance. The power switch is included to turn off when not in use to save power
●[Multiple Safety Protection] Comes with protective circuits such as overvoltage, overcurrent, overheating, overload, and short circuit protection, so you can use it with confidence
●Easy to install: Cord length is approximately 27.6 inches (70 cm). Long enough for most bikes. Can be attached to steering wheel or side mirror
●Equipped with 2 ports: There are 3 output solutions, output voltage is as follows: 5V3.4A/ 9V2A / 12V1.5A (Note: The output of the USB port is automatically adjusted depending on the charging device. There is no difference between left and right sides. )
●Wide Range of Applications: This motorcycle power adapter is suitable for all 10-24V cars, motorcycles, ATVs, ATVs, ATVs, quads and snowmobiles
[Dual USB Port]
[USB+TYPE-C port]
Description
Palumma Motorcycle Power USB Charger 3.4A Safety Charger QC3.0 Quick Charge Voltmeter Thermometer Waterproof Over Pressure Protection LED Digital Sock Can be Attached to Motorcycle Handle or Side Mirror
Product Description:
This bike USB charger has an input voltage of 12V. First, check whether the voltage of your bike is within this range.
Silicone material, waterproof and dustproof, prevent rain and dust, effectively extend the service life of the product.
When the switch is on, the car voltage will be displayed in real time.
Waterproof cap prevents rain and sand from entering.
Widely used for charging electronic devices. Such as: mobile phones, tablets, GPS, cameras, mp3 etc.
Features:
Product Name: Motorcycle USB Charger.
Material: ABS flame retardant high and low temperature material
Product Color: Black
Product line length: 70cm
Input Voltage: 12-24(V)
Product interface: Dual USB port/USB+TYPE-C port
Charging Port Output Voltage: USB: 5V/3.4A, 9V/2A, 12V/1.5A; TYPE-C: 5V/3A, 9V/2.2A, 12V/1.67A
Package Size: 3.2 x 2.6 x 4.1 inches (8.1 x 6.5 x 10.4
Product Net Weight: 101g
Installation Method: Install Rear View Mirror Bracket or Handlebar Bracket
Wiring Method:
You need to connect the red line to the positive (+) of your motorcycle battery, and the black wire to the negative pole(-) of your motorcycle.
Package Includes:
1 x Motorcycle USB Charger
1 x Rear View Mirror Bracket
1 x Handlebar Mounting Bracket
1 x Anti-Slip Gasket
1 x Fixed gasket
2 x Small Screws
1 x Long Scrim
1 x Fixed Nut
Note:
No cigarette lighter port
When the cap is open, it is not waterproof. Please avoid using it in car washing or heavy rain. Also, please make sure to tighten the included rubber cap when not in use.