Feature
●Size: Total length 9.8 inches (250 mm)
●Emitting part: φ1.2 x H5.9 inches (30 x 150 mm)
●Product Weight: Approx. 3.2 oz (90
●Accessories: Strap, instruction manual (English language not guaranteed)
●Battery: 3 x AAA batteries (test batteries included)
●Color Tuning Function (Bluetooth)
●Equipped with HotButton function (jumping in the guessing color)
[X10V Shining]
[X10V Super Tube]
[X10V Smoke]
Description
商品紹介
KING BLADE X10 V
Comes with color tuning function.
15 Default Colors + Infinite Luminous Pattern
Customize your lighting color/brightness/color scheme
The combination of RGBW allows for endless custom patterns
Share pattern lists for synchronous writing.
Memory settings can be registered up to 30 colors x 2 patterns.
Equipped with HOT BUTTON.
3 x AAA batteries (test batteries included)
安全警告
Test batteries included
From the Manufacturer
King BLADE X10V (King Blade Ten Five)
Emitting colors are limitless and equipped with Bluetooth tuning.
RGBW-LED default color 15 colors.
Equipped with dual memory function.
Press 1 push to jump color, Hot ButtonButton.
How to use the default mode (15 color changes)
● ON: Press switch A for about 0.5 seconds and release your finger.
(Long press on OFF) will start with the first color.)
OFF: Press and hold switch A for about 1.5 seconds.
Color change: Press Switch A to change the following color order; Press Switch B to reverse color.
1. RED → 2. BLUE → 3. WHITE, 4. ORANGE, 5. GREEN, 6. PURPLE.
7. PINK → 8. YELLOW → 9. LIGHT GREEN → 10. LIGHT BLUE
11. LIGHT PINK → 12. VIOLET → 13. LIME → 14. TURQUOISE → 15. HOT PINK
How to use the memory function (changes in color and color)
Memory (1)
1. When turned off, press and hold switch B for 3 seconds.→RED will slowly blink
2.Press switch A to change color.Press switch B to choose color, flashing faster.
Select the color in the order you want to set it.
(up to #20)
3. After selecting all color, long press switch BTurn off and set is complete.
Memory (2)
1. When turned off, press and hold Switch A and Switch B at the same time for 3 seconds; → Blue will blink slowly.
2.Press switch A to change color.Press switch B to choose color, flashing faster.
Select the color in the order you want to set it.(up to #20)
3. After selecting all color, long press switch BTurn off and set is complete.
Set the 20th to automatically turn off and complete the setting.
Memory Pattern Selection
1. When turned off, press and hold switch B for 3 seconds.→RED flashes.
2. Press Switch C to select memory pattern.
If you want to select memory 1 → select RED.
● If you want to select Memory 2 → Choose Blue
If you want to choose the default mode, select WHITE.
3. Choose either RED/BLUE/WHITE, and hold switch BTurn off and select is complete.
The setting is the same as the default mode when the setting is completed.
Memory Reset
- When the switch is turned off, press and hold switch B for 3 seconds → RED flashes.
- Press Switch C to choose the memory you want to erase.
- If you want to reset memory 1 → select RED
- If you want to reset memory 2 → choose BLUE
- Press and hold switch A and B at the same time.Turn off and reset is complete.
- The default mode (15 color change) cannot be erased.
How to use Hot Button?
First, press and hold switch C for about 3 seconds.→ Flashes only once, setting is complete.
Next, press Switch C when any color is lit, and it will jump to color.
Finally, when the setting color is lit, press Switch A or B to resume the color before jumping to color.