Feature

●[Product contents] · Special Tools, keys, CR2 Lithium Battery Package back/Instruction Manual (English), Warranty is not available.
●[Size] (U Part): 14 mm locking bar diameter * including rubber coating and diameters are approximately 18 mm and lock bar interior width (U Part): 83 mm · bar interior height (U Part): 300 mm (slight measurement error due to manual measurement, please)
●[Size] ara-muyunitto with built-in part diameter: 34 mm/Width: 151 mm * Silicone Covers are not included (please pardon the slight measurement error)
●[Material]: Stainless Steel


Description

Product description

Strong steel body and a solid key barrel and a very powerful U Lock.
Tire and Wheel can be fixed, and with the creature.
of course, not just for motorcycles, bicycles and more are also available.
Also, columns. Locking bar interior height is 300 mm so you will have your vehicle and can be tied at the same time, what you are also available.
Detects the vibration to the piasuara-mu with 120dB loud voice when in your vehicle, anti-theft and the vest to the products.
Waterproof on a disc lock body has a special surface treatment with luxurious finish. Although the
Battery uses a CR2 lithium batteries for the alarm. (approx 10 months)
The alarm is also [on/off] function.
Proper Operation ------ – -----
[On/Off switching method]
Turning the key 270 degrees (approx) when reverse the lock and the key to "lock" and shows a short notification sound 1 times, while its sekyuritexiara-mu after a few seconds in on mode the notification sound is ringing.
You can repeat the same operation once again quickly after you have taken operation and "pipixtu" and above, on a short notification sounds 2 times. Ringing. This sekyuritexiara-mu when you will be off.
* Please check the sound when you want to lock the key, working on your key, and clear.
How to installation Our [battery]
* Included Tools except the Philips Screwdriver is required to use this product. Available in.
1. Remove the locking bar.
2. Remove the locking bar holes for a Philips screwdriver and 差込mi service.
* The key cylinder with taking off if not in service.
3. Silicone cover, covers, ara-muyunitto is removed at the ends.
4. ara-muyunitto bis (2 points) with the included tools can be unscrewed.
5. Battery Cover, Waterproof cover and remove the battery.
6. Complete For Reverse Mounting with step-by-step instructions.
* Keep your batteries in your when fitting, waterproof cover and remember you are not supported.
* ara-muyunitto when fitting, please please note that are available in ara-muyunitto precisely-cut notches on the insert to the slot.

ご注意(免責)>必ずお読みください

ご利用のオートバイのタイヤサイズ等をご確認くださいますようお願い致します。