Strong steel body and strong key barrel, very strong U shaped lock.
Can be firmly fixed to tires and wheels.
Of course, it can be used not only for motorcycles, but also for
When it senses vibration, a loud 120 dB of piercing alarm will be sounded, and this product is effective in preventing your car from theft.
In addition to being waterproof, the disc lock body is treated with a special surface for a luxurious finish.
Alarm battery adopts CR2 lithium battery. (Can be used for about 10 months)
The alarm also comes with a "ON/OFF" function.
------ Operation Method ------
[On/Off Switch]
Turn the key to lock (about 270 degrees) and if you reverse the key, the "tick" and a short notification sound will sound after a few seconds of the security alarm turned on mode.
After you turn it on above, quickly repeat the same operation again to make a short "pippi" notification. The security alarm will be OFF.
When locking the key, please check the sound of the operation before locking it.
How to install the battery:
A Phillips screwdriver is required for other than the included tools. Please prepare it.
1. Remove the lock bar.
2. Insert the Phillips screwdriver into the hole of the lock bar and remove the screws.
Remove screws for those who do not have a key cylinder.
3. Remove the silicone cover, cover and alarm unit.
4. Remove the screws (2 locations) of the alarm unit with the included tool.
5. Remove the battery cover, waterproof cover and install the battery.
6.Reversed steps to assemble and done.
When installing batteries, please be careful not to leave the waterproof cover.
When installing the alarm unit, please be careful to insert the alarm unit cutout.
ご利用のオートバイのタイヤサイズ等をご確認くださいますようお願い致します。