The HG1 is a removable baton crossguard for NEX Quickers Batons and batons with a diameter of 26-27mm.
Easy to install baton without additional tools.
The 360° rotating base allows you to instantly change from split mode to cross mode.
HG1 has a hardness of over 130 HV, and will not bend up to 280 lbs. By attaching HG1, your hands are comprehensive protection from baton strikes and knife cuts.
Installation
Remove the tightening cap on the top of the body and insert the baton. After determining the desired position, install the tightening cap.
The ASP Talon series has a diameter of 1.1 inches (27 mm), so you can attach HG1 as is.
Other HG1 available batons are listed below.
ASP All TARON Series (Diameter 27mm)
MOTEDO Auto-Lock Baton, 16/21/26" (Diameter 27mm)
Autolock Baton KL26L (Diameter 1.0 inches (26.5 mm)).
Auto-Lock Baton KL21H (Diameter 1.0 inches (26.5 mm)).
Auto-Lock Baton KL26H (Diameter 1.0 inches (26.5 mm)).
Friction batons can be installed depending on the type.
NS Baton/Rubber Grip (Diameter 27mm)
Black Eagle NS Baton/Rubber Grip (Diameter 27mm)
ALA/ALS/SAS Series Rubber Grip (Diameter 27mm)
The ASP Friction Baton is 1.0 - 1.0 inches (25 - 25.5 mm), so you can install it by wrapping the tape around the mounting area to increase the thickness of the grip.
These batons cannot be installed:
x Auto-Lock Baton KL21L (Diameter 1.1 inches (28.4 mm)).
x BONOWI (Diameter 1.1 inches (28 mm)).
(BONOWI removes the rubber from the HG1 inner and shave the inner diameter of 0.02 inch (0.5 mm) to allow for installation. Please contact us for details. )
Please note that the baton is not included.