Feature

●Applications: Supports 3.2 GHz (4K and 8K broadcasting), and is used to amplify UHF, BS, and 110°CS radio waves
●[Features] Power detachable booster with low noise and high output support 3.2 GHz (4K and 8K broadcast)
●Features: The power supply is removable, so it can be installed in conventional antenna reception, in a detached building or inside an information box
●[Features] Comes with a power conversion switch for BS/110°CS input and UHF input side
●Features: You can check the power lamp without opening the case
●Specifications: Output monitor terminal, compatible mast diameter: 0.9 - 2.0 inches (22 - 50 mm)
●Accessories: 5 sets of F type fittings (for 5C), 3 waterproof caps, 5 mounting screws (pre-installed on the main unit), 1 set of mast holders, 1 metal cap for monitors (installed on the main unit)


Description

RoHS compliant.
For outdoor use.
Gain switching type
Supports 3.2 GHz (4K / 8K).
UHF amplification
Supports terrestrial / BS / 110°CS digital broadcasting
Frequency band (MHz): UHF 470-710/BS, 110°CS 1032-3224
Gain (dB)
UHF: 42, 32, 27
BS, 110°CS (1032/3224MHz): 25/35
BS, 110°CS (1032/3224MHz): 25/35, 15/25
Switchable type, standard value (input level adjustment).
Gain adjustment range (dB): 0 - -10 (continuously)
Suitable input level (dBμV): UHF 40-86/BS, 110°CS 45-88 (48 waves)
Rated output level (dBμV): UHF 103 (9 waves)
BS, 110°CS (1032/3224MHz): 93/103 (48 waves)
Noise index (dB): UHF 2.5 or less/BS, 110°CS 10 or less; Maximum gain 2 inputs (head)
Input and output impedance (Ω): 75
Voltage constant wave ratio (below): UHF 3/BS, 110°CS 2.5
Power supply voltage/current: DC 15V 0.15A (amplifier part)
Power consumption: 3.5 W
Input terminal: 9.6 (*Terrestrial digital booster: 0.06A, BS, 110°CS antenna: 0.27A power transmission)
Power transmission capacity: DC 15 V 0.33 A (total input terminal).
Compatible mast diameter: 0.9 - 2.0 inches (22 - 50 mm)
Dimensions (H x W x D): 5.4 x 4.8 x 1.9 inches (136 x 121 x 48
Weight: 1.3 lbs (0.6 kg) (including power supply)
Output monitor terminal included
High shield construction
Accessories: 5 sets of F type fittings for 5C, waterproof caps x 3, mounting screws x 5 (pre-installed on the main unit), mast holder x 1, metal cap for monitor x 1 (installed on the main unit).