Feature
●Suction cup design, easy to install. Product---Equipped with a strong suction cup, the water retention strip is more convenient to move and can be stored when not in use. Push the suction cup firmly to get close to the ground. It is waterproof and very labor-saving. (If you put a small amount of water in the suction cup during installation, the suction cup will become harder)
●High Quality Silicone Material---Silicone material is healthy, waterproof, resistant to high and low temperature, no deformation. It effectively blocks water flow and easily separates dry and damp items. The sealing strip is soft and will not hurt your feet. It doesnt matter if you kick it or not, ensuring the safety of you and your family. The surface is easy to clean, just wipe clean with a wet towel as new
●Flexible Water Blocking Strip---Can be bent according to the environment and achieve water blocking effect. The length can be cut with a knife for a more accurate fit. Waterproof strip is mainly used for bathroom floors, bathroom door bottom, kitchen
●Strong Water Blocking Effect---Bathroom water stop can keep water in the shower, prevent water from overflowing from bathroom and other places, help separate wet and dry effectively. Try it and say goodbye to humid environments! This is especially suitable for shower tray, shower base, kitchen, and other areas where water needs to be retained
●WIDE APPLICATION---Suitable for flat and smooth dry corners, such as ceramic tile, plastic, marble, metal, glass, smooth wood, etc. Suitable for bathroom floor, kitchen sink, bathtub and shower door bottom
[1.1m]
Description
Features
-360° bending and deformation
- Suction cup design, easy to install
- Free Cut Length
- Easy to clean and maintain
-Leak proof, dry and wet separation
- Non-painful feet, soft and airtight
- Can be used multiple times and stored when not in use
Specifications
Material: Silicone
Color: White
Height: 5cm / 1.97inch
Width: 4.5cm / 1.8inch
Installation Instructions and Precautions
1.Clean the floor carefully and keep it dry. This step is very important!
2. Confirm the length and determine where the water stop plate is installed.
3, Peel off the tape on the back of the water strip, stick it to the mark, and press it gently.
4, Please fill the gap between the edges to prevent falling off. Remove excess glue.
5. Finally, keep dry within 24 hours to avoid contact with water.
Package includes the following:
1 x Folding Threshold Water Dam with Suction Cup