Tool for cutting resin cable ties (width 0.09 - 0.19 inches (2.2 - 4.8 mm), thickness 0.04 - 0.06 inches (1.0 - 1.5 mm), length less than 11.8 inches (300 mm)
The holding parts hold the cutting edge of the cable bands, so the edges do not shatter and work safely.
Because this is a special blade made for resin, there is no protrusion on the cutting surface of the cable band compared to regular iron wire nippers, and the cutting surface will not protrude from injuries during work.

Compared to iron wire nippers, the cut surface has no protrusion and clean traces.
It can be cut with sliche; prevents injuries caused by cutting surfaces.
Holds slits securely without flying off.

As this is a blade, it will deteriorate depending on how many times it is used and how it is used.
Do not use on items that are running electricity. The resin on the grip is not intended for insulation.

From the Manufacturer

Bandhold Nippers

No. PNC-125 Nominal Dimensions: 4.9 inches (125 mm) resin cable ties (width 0.09 - 0.06 inches (2.2 - 4.8 mm), thickness 0.04 - 0.06 inches (1.0 - 1.5 mm), length 11.8 inches (300 mm) or less.Holding parts hold the edge of the cable band so that the cutting edge is not shattering, making it safe to work.Because the blade is made specifically for resin, there is no protrusion on the cutting surface of the cable band than ordinary iron wire nippers, and the cutting surface will not protrude from injuries during work.

(more)

Conditions of Use

(more)